Kenwood KDC-X896 Quick Start Manual

Also see for KDC-452U: Quick start guide

Kenwood KDC-X896 Quick Start Manual Manual pdf 35 page image

30 | KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U/ KMR-550U English | 31ContentsDisplay settingsInformation display settingYou can set the side and graphic parts of thedisplay.1 Enter the Function setting modePress and hold the Control knob.2 Select the Display select itemSelect the following items using the Controlknob.“Settings” “DISP&ILLUMI” “Display Select”3 Select a desired Information display settingitemTurn the Control knob to select a display settingitem, and then press the Control knob.Display Description“Display Select”“Side Select” Sets the side part display for Type A, B, and D.1 / 2 / 3 (Type A, B only)“Graphic Select” Sets the Type C clock display.1 / 2“Status” Sets the status display (ON/OFF indicator foreach function) for Type A and B.“ON” / “OFF”( : Factory setting)4 Select a setting and determine itTurn the Control knob to select a desiredsetting, and then press the Control knob.The previous item is displayed.5 Exit the Function setting modePress and hold the [ ] button.Function of KDC-X896/ KDC-BT852HD/ KDC-X496/KDC-452UIllumination color selectionYou can select the illumination color of the panel.1 Enter the Function setting modePress and hold the Control knob.2 Select the Color select itemSelect the following items using the Controlknob.“Settings” “DISP&ILLUMI” “Color Select”3 Select the part for which you want to set theillumination colorDisplay Part“Color Select”“Color SEL All” All“Color SEL Display” Display“Color SEL Key” Button“Color SEL USB&AUX” USB terminal and Auxiliary inputTurn the Control knob to select a part, and thenpress the Control knob.4 Select an illumination colorTurn the Control knob to select a color, andthen press the Control knob.Select a color from “Variable Scan”/ “Color1” —“Color24”.Adjusting the RGB valuesIn this step, you can also create your original colorduring the selection from “Color1” — “Color24”.The color you created can be called by selecting“User”.1. Press and hold the Control knob.Enter the Detail color adjustment mode.2. Set the color.Operation type OperationTo select the color to adjust(Red, Green, or Blue)Push the Control knob rightward orleftward.To adjust color(Range: 0 – 9)Turn the Control knob.3. Press the Control knob.Exit the Detail color adjustment mode.5 Exit the Function setting modePress and hold the [ ] button.Display & Illumination settingYou can set the display and illumination.1 Enter the Function setting modePress and hold the Control knob.2 Select the Display & Illumination setting itemSelect the following items using the Controlknob.“Settings” “DISP&ILLUMI”3 Select a desired Display & Illumination settingitemTurn the Control knob to select a Display &Illumination setting item, and then press theControl knob.Display Description“DISP&ILLUMI”“DISP ILLUMI OFF” When “Type E” (Display off) is selected in (page 28), setswhether to turn off the display only or both thedisplay and key illumination.“DISP&ILLUMI” / “DISP”“Display Dimmer” Dims the display part in conjunction with theLight switch of the vehicle.“Auto”: Dims the display in conjunction withthe Light switch of the vehicle.“Manual1”: Dims the display constantly.“Manual2”: Dims the display darker than thatin the Manual1 mode.“OFF”: Does not dim the display.“Contrast” Sets the display contrast.“1” – ”10” – “30”“DISP NEGA/POSI” Switches the panel display between positiveand negative modes.“NEGA1”: Displays the text in the negativemode.“NEGA2”: When the interior light is off, thetext is displayed in the negativemode; when the interior light is on,the text is displayed in the positivemode.“POSI1”: Displays the text in the positivemode.“POSI2”: When the interior light is off, the textis displayed in the positive mode;when the interior light is on, the textis displayed in the negative mode.“Text Scroll” Sets the method of scrolling to view hiddentexts.“Auto” : Scrolls.“Once” : Scrolls once.“OFF” : Does not scroll.“BT DVC Status” You can display the connection status, signalstrength, and battery level.: Battery level of cell-phone.: Signal strength of cell-phone.(Function of KDC-X896/ KDC-BT852HD)“ILLUMI Dimmer” Reduces the key Illumination brightness.“Auto”: Dims the illumination in conjunctionwith the Light switch of the vehicle.“Manual1”: Dims the illumination constantly.“Manual2”: Dims the illumination darker thanthat in the Manual1 mode.“OFF”: Does not dim the illumination.“ILLUMI Effect” Sets whether the key illumination is changedin conjunction with the key operation.“ON” / “OFF”( : Factory setting)4 Determine the Display & Illumination settingTurn the Control knob to select a desiredsetting, and then press the Control knob.The previous item is displayed.5 Exit the Function setting modePress and hold the [ ] button.