|
80 | KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U/ KMR-550U English | 81ContentsThe messages shown below indicates yoursystem condition.“TOC Error”• The CD is quite dirty. The CD is upside-down. The CD isscratched a lot.• The disc is unreadable.“IN” (blink)• The CD player section is not operating properly.➪ Reinsert the CD. If the CD cannot be ejected or thedisplay continues to blink even when the CD hasbeen properly reinserted, please switch off the powerand consult your nearest service center.“Protect” (blink)• The speaker wire has short-circuited or touched thechassis of the vehicle, and then the protection functionhas been activated.➪ Lay or insulate the speaker cable properly and pressthe Reset button. If “Protect” does not disappear,consult your nearest service center.“NA File”• An Audio file is played in a format that is not supportedby this unit.“Copy PRO”• A copy-protected file is played.“Read Error”• The file system of the connected USB device is broken.➪ Copy the files and folders for the USB device again. If“Read Error” is still displayed, initialize the USB deviceor use another USB device.“No Device”• A USB device is selected as a source although no USBdevice is connected.➪ Change the source to any source other than theUSB device. Connect an USB device, and change thesource to the USB device again.“N/A Device”• An unsupported USB device is connected.• Connection to the iPod has failed.➪ Check that the connected iPod is supported. See (page 76) for informationon supported iPods.“No Music Data”• The connected USB device contains no playable audiofile.• A medium that does not have playable data has beenplayed.“iPod Error”• Connection to the iPod has failed.➪ Remove the USB device and then reconnect it.➪ Reset iPod/ iPhone.“No Number”• The calling party does not notify a caller ID.• There is no phone number data.“No Data”• There is no outgoing call list.• There is no incoming call list.• There is no missed call list.• There is no phone book list.“No Entry”• The cell-phone has not been registered (pairing).“HF Disconnect”• The unit cannot communicate with the cell-phone.“AUD Disconnect”• The unit cannot communicate with the Bluetooth audioplayer.“HF Error 07”• The memory cannot be accessed.➪ Cycle the power switch. If this message still appears,press the Reset button on the control unit.“HF Error 68”• The unit cannot communicate with the cell-phone.➪ Cycle the power switch. If this message still appears,press the Reset button on the control unit.“HF Error 89”• Update of the firmware has failed.➪ Retry update of the firmware.“Unknown”• The Bluetooth device cannot be detected.“Device Full”• 5 Bluetooth device have already been registered. No moreBluetooth devices is registered.“PIN Code NG”• The PIN code is wrong.“Connect NG”• The unit cannot be connected to the device.“Pairing Failed”• Pairing error.“N/A Voice Tag”• No voice tags are registered in your cell-phone.“No Phonebook”• Data is not contained in the phone book.“No Message”• No short message in In Box.“Send Error”• SMS could not be sent.“Memory Full”• The tag memory of HD Radio tuner and SiriusXM tuneris FULL.“iPod Full”• The iPod memory is FULL.“No TAG Function”• An iPod which does not support the tag memory hasbeen connected.“Pandora Error 01”• Registration in Bookmark has failed.“Pandora Error 02”• Deletion of the station has failed.“Pandora Error 03”• Registration of the station has failed.“Pandora Error 04”• The number of registered stations has reached the upperlimit.➪ Retry after deleting an unnecessary station.“Pandora Error 05”• Registration of Thumbs Up/Down has failed.“Pandora Error 06”• Keyword search has failed.“No Station”• There is no receivable station.“No skips remaining”• No more skips are allowed now.➪ Retry after a while.“Check Device”• Any device ready for Pandora internet radio reception isnot connected to this unit.“No Support”• The connected Bluetooth device does not support avoice recognition function.“No Active Device”• Any Bluetooth device supporting a voice recognitionfunction is not connected.Troubleshooting guideSiriusXM Advisory Messages“Check Tuner”• A SiriusXM tuner is not connected to this unit.➪ Check that the connected SiriusXM tuner isconnected.“Subscription Updated - Press Enter to Continue”• The SiriusXM subscription has been renewed.➪ Pressing the Control knob will clear the errormessage.“Ch Unavailable”• The currently selected channel is unavailable.“Chan Unsub”• The currently selected channel is not subscribed to.“Incorrect Code”• The entered pass code is incorrect.“Check Antenna”• No antenna is connected to the SiriusXM tuner.➪ Check that an antenna is connected to the SiriusXMtuner.“No Signal”• No SiriusXM radio signal is received.➪ Check that an antenna is connected to the SiriusXMtuner.“Alert Memory Full”• The number of Alert content has reached the upper limit.➪ Retry after deleting unnecessary Alert content.“Song Stored”• The song you attempted to register as Alert content hasalready been registered.“Artist Stored”• The artist you attempted to register as Alert content hasalready been registered.“Art/Sng Unavail”• The content currently being received cannot beregistered as a content alert item regardless of whether itsartist or song name is stored.
|
