50 | KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U/ KMR-550U English | 51ContentsBluetooth audio device operationBefore use• You need to register your Bluetooth audio playerbefore using it with this unit. For more details, see (page 38).• You need to select the Bluetooth audio player youwish to connect. Refer to device you wish to connect> (page 41).Basic operationsSelecting a Bluetooth audio sourcePress the [SRC] button.Select the “BT AUDIO” display.Pause and playPress the [ ] button.Music searchPush the Control knob rightward or leftward.Fast forward or Fast backward of the songPush and hold the Control knob rightward orleftward⁄• All or some of the operations above cannot be performed ifthe Bluetooth audio player is not ready for remote control.• Switching between Bluetooth audio sources does not startor stop playback automatically. Perform the operation forstarting or stopping playback.• Some audio players cannot be controlled remotely orreconnected after Bluetooth disconnection. Operate themain unit of the audio player to connect a Bluetoothdevice.Function of KDC-X896, KDC-BT852HDPlayback modeYou can select a playback mode, such as Randomplay and Repeat play.1 Select the Bluetooth audio sourcePress the [SRC] button.Select the “BT AUDIO” display.2 Enter the Function setting modePress and hold the Control knob.3 Select the Play function modeTurn the Control knob to select “Play Mode”,and then press the Control knob.4 Select a desired playback modeTurn the Control knob to select a playbackmode, and then press the Control knob.Display Description“Play Mode”“Random” When set to “ON”, plays the songs randomly.“ON” / “OFF”“File Repeat” When set to “ON”, plays the select songsrepeatedly.“ON” / “OFF”( : Factory setting)5 Determine the selectionPress the Control knob.The previous item is displayed.6 Exit the Function setting modePress and hold the [ ] button.⁄• The available playback functions differ depending on thetype of the connected Bluetooth audio player.Switching between Bluetooth devicesWhen two Bluetooth devices are connected, youcan select the Bluetooth device you want to use.1 Select the Bluetooth audio sourcePress the [SRC] button.Select the “BT AUDIO” display.2 Select a Bluetooth devicePress the [PRESET] button.“Device Priority” is displayed and the currentlyselected device name is displayed.
