Kenwood KRC-509S Instruction Manual

Also see for KRC-509S: Service manual

Contents

Switch the display that appears while tapes are playing.Switching the Tape display :Each time you press the DISP button, the display during tapeplay switches as follows:The tape counter is not exact, but only represents anapproximation of the elapsed time.NOTEPlay side + Tape counterPlay side + Tape runningPlay sideSwitching Display for Cassette TapesRepeatedly plays the track currently being listened to.Turning Music Repeat On/Off:Press the REP button to switch music repeat on/off."Repeat ON" is displayed when music repeat is turned on.Canceling Music Repeat:Press either the REP or PROG button.Music repeat "knows" where a track begins by detecting theblank space preceding it (the space between tracks). However,when the blank space lasts for less than four seconds or containsnoise, this function may not operate correctly. Furthermore,sections that are recorded at low levels may trigger the functionif they last for four seconds or more.NOTEMusic RepeatAutomatically fast forwards to the beginning of the next trackwhen long blank spaces (10 seconds or more) are detected,continuing tape playback. This function is on, when unit is firstpowered on.Turning Blank Skip Function On/Off:Press the B.S button to switch the blank skip function on andoff.“B.Skip ON” is displayed when the blank skip function isturned on.• If the blank space contains much noise, the blank skip functionmay not work right.• Sections recorded at low levels may trigger the blank skipfunction if they last for 10 seconds or more.NOTEBlank SkipCassette player features— 14 —English