You can recall the best audio setting preset for different typesof the music.Switching the Preset Sound Setting:Each time you press the Q button, the preset sound settingswitches as follows:As you proceed, each indicator would go on.The System Q function changes the values of the followingsound quality parameters:Bass center frequency, bass level, bass quality factor, bassextend, middle center frequency, middle level, middle qualityfactor, treble center frequency, and treble level.Their setting values are different depending on the setting of thespeaker setting mode.NOTEFlatEasyRockJazzPopsTop 40Scan of Flat – Easy(Default setting)User memory**User memory:The unit returns to the stateadjusted the last time withthe audio control setting feature.System QSource tone memoryEach source (tape, CD, MD, FM, AM and disc changer) has itsown memory in which to store the bass, middle, and treble tonesettings.The settings made for a particular source are recalledautomatically whenever you use that source (for example, FMmode uses the tone settings made for FM, AM for AM, etc.).Adjust each modePress the 4/¢ button.Look at the table to adjust the mode being displayed.Press the AUD button to end the control mode.Determining the parameters in the audio control setting wouldclear all the adjustments made in the System Q and they arereplaced with the values in the audio control setting.NOTE4Adjustmentmode(Display)Bass ("Bass")Treble("Treble")Balance("Balance")Fader ("Fader")Bass decreased.Treble decreased.Bass increased.Treble increased.Middle("Middle") Middle decreased. Middle increased.4 button ¢ buttonOperation of Audio control buttonFront channel increased.Rear channel increased.Volume Offset("V Offset")The sound level ofeach source increased.The sound level ofeach source decreased.Right channel emphasized.Left channel emphasized.3NOTE— 7 —