Kenwood KRF-V7300D Instruction Manual

Also see for KRF-V7300D: Service manual

Contents

34 KRF-V9300D/KRF-V8300D/KRF-V7300DSetupIf a message is displayedIf a message is displayedIf an error or a confirmation message is displayed andmeasurement is stopped in the middle, a trouble may bedetected during the measurement. Read the message and takethe proper measure before retrying measurement.Error message: Take the measure according to themessage and retry measurement.Confirmation message: Check the message content. Theoperation can be continued withoutretrying measurement.Error messages"E1 : No Mic" :The setup microphone is not connected.➡ Connect the provided setup microphone to the [AUTOROOM EQ MIC IN] jack."E2 : Phones" :Headphones are connected.➡ Unplug the headphones."E3 : No Sp L/R" / "E3 : No Sp L" :One or both of the front speakers are not connected.➡ Connect the front speakers properly."E3 : No Sp SL" / "E3 : No Sp SR" :One of the surround speakers is not connected.➡ Connect the surround speakers properly."E3 : No Sp SBL" :One of the surround back speakers is not connected.➡ If the system is a 7.1-channel system, connect both thesurround back left and right speakers.If it is a 6.1-channel system, connect the surround backspeaker to the [SURROUND BACK L] terminal."E3 : SB w/o S" :The surround left and right speakers are not connected.➡ Connect the surround left and right speakers properly."E4 : Noisy" :The measurement environment is too noisy.➡ Remove the cause of noise before retrying measurement."E5 : Bad S/N" :The measurement environment is too noisy.➡ Retry measurement. Do not control the speaker volumeduring measurement."E6 : Far SP" :The speaker is installed too apart.➡ Reinstall the speaker."E7 : DSP" :A communication error occurred inside the unit.➡ Retry measurement. If the same error messagereappears, contact your nearest Kenwood servicecounter."E8 : Time Out" :The measurement took too long time due to a certaincause.➡ Retry measurement. If the same error messagereappears, contact your nearest Kenwood servicecounter.KRF-V9300D and KRF-V8300D Speaker setup –"Auto Setup"(Auto Room EQ)–