Kenwood KRF-V7300D Instruction Manual

Also see for KRF-V7300D: Service manual

Contents

English 61Sound adjustmentACTIVE EQMULTI CONTROL /OENTERACTIVE EQBASS BOOSTTONEENTERMULTI CONTROLO/ACTIVE EQ modeACTIVE EQ modeThe optimum acoustic field effect can be selected according tothe purpose of playback.Press [ACTIVE EQ].Each press switches the mode as follows:Display Setting"Active EQ Music" Effective when listening to music."Active EQ Cinema" Effective when watching a movie."Active EQ Game" Effective when playing a game."Active EQ Off" Active EQ function is off.ACTIVE EQ indicator lights up.Adjusting the ToneAdjusting the Tone¶ Operation available only on the remote control unit.The tone level can be adjusted when the input signal is a PCM oranalog signal and the listen mode of this unit is set to "Stereo",and also ACTIVE EQ mode is set to "Off".1 Press [TONE].2 Select whether or not the tone level is to beadjusted.Use [MULTI CONTROL ∞/5] to select "Tone On" or "ToneOff".[ENTER]Display Setting"Tone On" The tone level can be adjusted. Go to step 3 after setting."Tone Off" The tone level is not adjusted.3 Adjust the level of "Bass" (low frequencies).Use [MULTI CONTROL ∞/5] to adjust the level.[ENTER]The level is adjusted from –10 to +10.4 Adjust the level of "Treble" (high frequencies).Use [MULTI CONTROL ∞/5] to adjust the level.[ENTER]The level is adjusted from –10 to +10.Bass BoostBass Boost¶ Operation available only on the remote control unit.The Bass Boost can be adjusted when the input signal is a PCMor analog signal and the listen mode of this unit is set to "Stereo",and also ACTIVE EQ mode is set to "Off".Press [BASS BOOST].Press the key once to select the maximum (+10) lowfrequency emphasis setting.TONE will automatically be turned ON.To cancelPress [BASS BOOST] again.Adjusting the sound