|
6 KRF-V9300D/KRF-V8300D/KRF-V7300DBefore useHow to read this manualThe operating instructions given in this manual assume that the user mainly operates the receiver using the remote control unit. When thesame operation is also available on the main unit, the operating method is indicated in illustrations.The [VOLUME CONTROL], [MULTI CONTROL] and [INPUT SELECTOR] knobs on the main unit are operated by turning the knobs clockwiseor counterclockwise.Speaker setup –"Manual Setup"–Manual Setup is used to set up the speakers manually or tomodify the setups made with Auto Setup.SETUPENTERMULTI CONTROL//O/Speaker configuration –"SP Setup"–Speaker configuration –"SP Setup"–Select the use of each speaker and its size.1 Enter the Manual Setup mode.[SETUP]Use [MULTI CONTROL 2/3] to select "Manual Setup".[ENTER]2 Select "SP Setup".[MULTI CONTROL 2/3][ENTER]3 Select the use and size of each speaker.Use [MULTI CONTROL 2/3] to select the speaker.Use [MULTI CONTROL 5/∞] to set its use or size.Repeat the above operations until all of the speakershave been set up.Speaker Display SettingSubwoofer "SUBW On" Subwoofer is connected."SUBW Off" Subwoofer is not connected.Front speaker "FRNT Large" Large size front speaker"FRNT Normal" Average size front speakerPlaybackVOLUME CONTROLINPUT SELECTOR AV AUX/iPodVOLUME /o1 Select the source.Use the Input source keys on the remote control unit toselect a source.Or use [INPUT SELECTOR] knob or [AV AUX/iPod] key onthe main unit.2 Start playback from the selected source.The iPod can be controlled from this unit. (See control> i.)3 Use [VOLUME %/fi] to adjust the volume.4 Enjoy various surround effects.You can enjoy a variety of listen modes. (See play using the listen mode> Q.)The surround effects can be fine tuned according to theselected input source. (See the playing source> „.)• The AV AUX and iPod inputs cannot be selected with the [INPUTSELECTOR] knob of this unit. These inputs should be selectedusing the [AV AUX/iPod] on this unit or the [AV AUX] or [iPod] keyon the remote control unit.Continueddify the setups made with Auto Setup.Input source keysSe ect S Setup .e tThe knob on the main unitis pointed with an arrow toindicate that it can be turnedin either direction.The keys and controls used inthe operations described in eachsection are indicated with theirnames.The descriptions of the functionsavailable only on the remotecontrol unit are accompanied onlywith the illustration of the remotecontrol unit. The descriptions ofthe functions available only on themain unit are accompanied onlywith the illustration of the mainunit.The names of the operated keysare enclosed inside brackets.This icon indicates supplementaryinformation, restrictions inoperation or tips on operation.When a key is used to selectan option, the list of options isshown in the form of a table.This icon indicates that thedescription continues on thenext page.• In this manual, KRF-V9300D is used for the illustrations of front panel and rear panel.• The illustrations of the main unit display panel and the examples of operations are shown for the purpose of explanation and may differ fromthe actual view or operation. PreviousNext |