Kenwood KRF-V7300D Instruction Manual
Also see for KRF-V7300D: Service manual
                                                                        | |
Contents
|
62 KRF-V9300D/KRF-V8300D/KRF-V7300DSound adjustmentThe audio can be adjusted as desired according to the sourcebeing played.SOUNDENTERMULTI CONTROL//O/1 Press [SOUND] to enter the surround adjustmentmode.2 Use [MULTI CONTROL 2/3] to select the item toadjust.Display Setting item Range"CNTR" Center speaker level -10 – +10dB*1"SR" Surround Right speaker level -10 – +10dB"SBR" Surround Back Right speaker level -10 – +10dB"SB" Surround Back speaker level -10 – +10dB"SBL" Surround Back Left speaker level -10 – +10dB"SL" Surround Left speaker level -10 – +10dB"SUBW" Subwoofer level -10 – +10dB"INPUT" Input level -6, -3, 0 *2"PANORAMA" Panorama mode "On", "Off"*3"Dimension" Dimension"Center Width" Center Width"Center Image" Center Image *4"Midnight" Midnight mode "Auto", "1","2", "Off" *5"Dual Mono" Dual mono audio selection"Main", "Sub""Main+Sub","Stereo"*1 The adjustment is only temporary for the current inputselection. The value will return automatically to the originalsetup value when the power is turned on/off or when theinput selection is changed.* 2 Analog source only* 3 Pro Logic II Music mode and Pro Logic IIx Music mode only*4 Neo:6 Music mode only* 5 For "Auto": Dolby TrueHD source only3 Use [MULTI CONTROL ∞/5] to adjust the desireditem.For detailed adjustment method, see the explanation ofeach item.To exit the sound adjustment modePress [SOUND].Speaker level adjustmentSpeaker level adjustmentThe output level from the desired speaker channels can be fineadjusted according to the properties of each source.The adjustment is only temporary for the current input selection.The value will return automatically to the original setup valuewhen the power is turned on/off or when the input selection ischanged.1 Use [MULTI CONTROL 2/3] to select the speakerto adjust ("CNTR", "SR", "SBR", "SB", "SBL", "SL" or"SUBW").2 Use [MULTI CONTROL ∞/5] to adjust the level.3 Repeat steps 1 and 2 to adjust the level of otherspeakers.Input level adjustmentInput level adjustment¶ Analog source onlyIf the input level of an analog source signal is too high, the CLIPindicator will light to indicate. Adjust the input level.1 Use [MULTI CONTROL 2/3] to select "INPUT".2 [MULTI CONTROL ∞/5] to adjust the input level.Adjustments according to the playing source |
Related manuals for Kenwood KRF-V7300D
Kenwood KRF-V7070D Instruction Manual
Kenwood KRF-V5100D Instruction Manual
Kenwood KRF-V5200D Instruction Manual
Kenwood KRF-V7050D Instruction Manual
Kenwood KRF-V7090D Instruction Manual
Kenwood KRF-V4070D Instruction Manual
Kenwood KRF-V4060D Instruction Manual
Kenwood KRF-V6080D Instruction Manual
Kenwood krf v5080d Instruction Manual
Kenwood KRF-V8030D Instruction Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine