33Remote ControlThis operation lets you operate the registered components.KENWOOD audio components with system control turn on and offautomatically with the receiver via the system control connections.Use the MUSIC, MOVIE, or TV key to select the componentyou desire.• Pressing the MUSIC or MOVIE key also changes the input selectoron the receiver. If you do not want to change the current input, pressthe SHIFT key before step 1.NoteBe sure to point the remote control at the remote sensor on the receiverwhen you want to operate KENWOOD components connected bysystem control cords. Otherwise, point the remote control at the compo-nent you want to operate.MOVIE key1 Video12 Video23 Video34 DVD 6CH5 AV AUXMUSIC key1 CD/DVD2 TAPE or MD3 Tuner4 PHONOTV key1 TV12 TV23 CABLEPress the AV. POWER key.• The selected component turns on or off.• See "Remote operation of other components" at the end of thismanual for a list of keys available with each component.RC!The remote control mode remains in the set at the componentselected in step 1 mode until you select another component.123 Press the operation keys you desire.Getting the most from your remote controlVCRVideo1:MenuSelect source• “Shift” appears in the display.12Press the SHIFT key.Press the MUSIC, MOVIE, or TV key repeatedly to displaythe remote control mode for the component you want tocontrol.3Execute the desired operations.• See "Remote operation of other components" for a list of keysavailable with each component. RC!The operation mode remains set at the component specified instep 2.To return control to the original component, press SHIFT andthen press the MUSIC or MOVIE key to return to the originalcontrol mode.• Pressing any other keys after the SHIFT key cancels the shift functionand sends the normal code associated with the respective key.• The input selector does not change during this operation.• If you press MUSIC or MOVIE key more than 3 seconds afterpressing the SHIFT key, the input selector changes together with theoperation mode.The component to be controlledThis operation lets you change the remote control operation mode withoutchanging the input selector.You may find this useful when you want to control one component whileusing another. (For example, if you want to rewind the tape deck whilelistening to a CD.)VCRShiftMenuDVDShiftMenu• To operate a TV, start form step 2.Press the MUSIC, MOVIE, or TV key until the desired sourceappears.MUSIC, MOVIE,TV+–+–SHIFTDuring opration, make sure you start the next step within8seconds of completing the previous one. If more than 8seconds elapses between any two steps, press the displayoperation key so that the display appears.During opration, make sure you start the next step within 8seconds of completing the previous one. If more than 8seconds elapses between any two steps, press the displayoperation key so that the display appears.AV.POWER I / MUSIC, MOVIE,TV+–+–SHIFT• You cannot select the source that is not registered.Operating other componentsChanging (confirming) the operation mode