35Remote Control2 Press the MUSIC, MOVIE, or TV key to execute thecorresponding macro play.1 Press the MACRO key.• "MACRO EXE" appears in the display and the pre-programmed macrois performed:MUSIC = "MACRO 1", MOVIE = "MACRO 2", TV = "MACRO 3"• Some devices take up to 1 second to power on. The macro functionhas an automatic delay after any power function output.• Pressing a key other than MUSIC, MOVIE, or TV cancels the macroprogram mode.Getting the most from your remote controlWhen MUSIC is pressedTo delete the setup codeSelect MACROMACRO EXEMenuSelect MACROMACRO1 EXEMenu• “MACRO EXE” appears in the display.1Press the display operation 1 key repeatedly until“Menu” appears in the display.VCRVideo1:Menu2Press the [Menu] key repeatedly until “01.IR” appearsin the display.Press the 5/∞keys to select “01.IR,” then press the[Enter] key.• The setup display appears.3• The input selecting display appears.Press the 5/∞keys to select the input that you want todelete, then press the [Enter] key.4Press the 5/∞keys to select “Delete.”5Press [Enter].6• The setup code is deleted.MACRO MUSIC, MOVIE,TV+–+–>04.Video2>03.Video1Back Enter>02.Surround>01.IRHome EnterDuring opration, make sure you start the next step within 8seconds of completing the previous one. If more than 8seconds elapses between any two steps, press the displayoperation key so that the display appears.During opration, make sure you start the next step within 8seconds of completing the previous one. If more than 8seconds elapses between any two steps, press the displayoperation key so that the display appears.>01:CD>13:DeleteBack EnterExecuting an automatic operationDisplay operation 1 5/∞Display operation 2+–+–