Kenwood KRF-V8060D Instruction Manual

Also see for KRF-V8060D: Service manual Service manual Instruction manual Instruction manual

Contents

18 ENConnecting the RF antenna and external IR Repeater (For VR-6060 only)The remote control for this receiver has the RF (radio frequency) and IR (infrared rays) transmission function. IR repeaters enables you to controlcomponents located in cabinets or behind glass doors. You can enjoy a wider remote control signal range by placing the RF antenna and IR repeater awayfrom the receiver.KENWOOD components (except DVD player): System control &Other components: (Registering setup codes) IR REPEATER flSetting up the systemRF REMOTE ANTENNAOUTIR REPEATERRF antennaMonitor TVIR repeatersShape of plug to be connected.IR REPEATER OUTMono Mini PlugIR OUT SPECIFICATION:Terminal IR REPEATEROUTTo Tip SignalTo Sleeve GroundSleeveTip(For RF Transmitter, select either1. RF REMOTE Band 1, or2. RF REMOTE Band 2)Connecting IR repeater1 Connect the IR repeater to the device as described in therepeater’s manual.2 Connect the IR repeater cable(s) to the IR REPEATER OUTjack(s).Notes• IR repeaters send a signal similar to the device’s own remote control.Xantech repeaters (models 282-00, 286-00, or 283-00) are compatiblewith your new audio-video receiver.Connecting the RF remote antenna1 Insert the jack of the provided RF remote antenna into theRF REMOTE ANTENNA jack.2 Place the antenna wire vertically and fix it.• Place the antenna away from the metallic panel.