Kenwood KRF-V8060D Instruction Manual

Also see for KRF-V8060D: Service manual Service manual Instruction manual Instruction manual

Contents

5 ENLSL S SB SRC RSP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfs DSP MODEDTSMATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CS IIA B CLIPAUTO DETECTAUTOMEMORYSTEREOTUNEDSWLFELOUDNESS SPEAKER EQ ACTIVE EQ DSP STEREO INPUT MODE DIMMERSOUND TONE SETUPBAND AUTO MEMORYMULTI CONTROL LISTEN MODETUNERMD/TAPEVIDEO 3VIDEO 2VIDEO 1PHONOCD/DVDDSPDTSCS IIDOLBY DIGITALSPEAKER EQACTIVE EQSTANDBYON/STANDBYA SPEAKERS BPOWERPHONESDOWNMUTEAV AUXS VIDEO VIDEO L-AUDIO-RUPVOLUME CONTROLSTANDBYPOWERON/STANDBYDVD/6CH-ON –OFFF ULL DIGITA LD E C O D I N GDisplaySpeaker selection indicatorsInput channel indicatorsOutput channel indicatorsAUTO indicatorMEMORY indicatorSTEREO indicatorTUNED indicatorNames and functions of partsFrequency displayInput displayPreset channel displaySurround mode displaySpeakerindicators1 POWER ON/OFF key(For KRF-V8060D) )Use to turn the main power ON/OFF.2 ON/STANDBY ( ) key(For KRF-V8060D) )Use to turn the power ON/STANDBY whenthe POWER is turned ON.STANDBY indicator2 POWER ON/STANDBY ( ) key(For VR-6060) )Use to turn the power ON/STANDBY.STANDBY indicator3 A SPEAKERS B keys ™Use to turn the A/B speakers ON/OFF.4 LOUDNESS key ¢Use to switch the status of LOUDNESS.5 SPEAKER EQ key ¢Use to select SPEAKER EQ’s setting.6 Surround indicatorsDSP indicator ºLights when the receiver is in the DSP mode.SPEAKER EQ indicator ¢Lights when the receiver is in the SPEAKEREQ mode.ACTIVE EQ indicator ¢Lights when the receiver is in the ACTIVE EQmode.DOLBY DIGITAL indicator ºLights when the receiver is in the DolbyDigital mode.Main unit& BAND key §Use to select the broadcast band.* AUTO key §Use to select the auto or manual tuningmode.( TONE key £Use to switch the status of TONE control.) MEMORY key §Use to store radio stations in the presetmemory.¡ SETUP key )Use to select the speakers' settings etc.™ MMMMM/????? keys )Use for selection adjustments during SOUND,SETUP and PRESET CHANNEL functions.£ MULTI CONTROL knob )Use to control a variety of settings.¢ LISTEN MODE knob ºUse to select the listening mode.∞ AV AUX (S VIDEO, VIDEO, AUDIO L/R)jacks ^§ AV AUX key ^Use to switch the input to AV AUX.DTS indicator ºLights when the receiver is in the DTS mode.CS q indicator ºLights when the receiver is in the CIRCLESURROUND II mode.7 ACTIVE EQ key ¢Use to select ACTIVE EQ’s setting.8 DSP key ºUse to select any of the DSP mode.9 STEREO key ¤Use to switch the listen mode to STEREO.0 INPUT MODE key 8Use to switch between the full auto, digitaland analog inputs.! DIMMER keyUse to select the REC MODE. ∞Use to adjust the brightness of the display.‹@ VOLUME CONTROL knob £# MUTE key ¢Use to temporarily mute the sound.$ PHONES jack ¢Use for headphone listening.% Input Selector keys £(DVD/6CH, CD/DVD, PHONO, TUNER,VIDEO 1, VIDEO 2, VIDEO 3, MD/TAPE)Use to select input sources.^ SOUND key ¤Use to adjust the sound quality and the ambi-ence effects.MUTEindicator CLIPindicator Input modeindicators Listen modeindicatorsFor VR-6060Standby modeWhile the standby indicator is lit, a small amount of power is suppliedto the system to back up the memory. This is called standby mode.Under the condition, the system can be turned ON by remote controlunit.Connection at POWER ON/OFF key (for KRF-V8060D)The power in this equipment will not be completely cut off from the ACwall outlet when the main switch is turned OFF.