Kenwood KRF-V8060D Instruction Manual

Also see for KRF-V8060D: Service manual Service manual Instruction manual Instruction manual

Contents

34 ENThe remote control supplied with this receiver is also capableof controlling components from a variety of manufacturersonce you register the appropriate setup codes into theremote control unit.Low battery warningReplace all two batteries with new ones when you notice a shorteningof the distance from which the remote control will operate.For LCD remote control (RC-R0816)The remote control is designed to retain setup codes in memory whileyou change batteries.For non-LCD remote control (RC-R0725)After changing batteries, please re-enter the setup codes.Registering setup codes for other componentsSOURCENumeric keysREMOTE MODEINPUTSELECTOR1Find the setup code of the component to be registered.• Refer to the setup code lists to find the setup code for thecomponent to be registered. flExample: To register a DVD made by KENWOOD, you would enter“805”.Input Component Maker Code Key(DVD) DVD player KENWOOD 805, 808 DVD2Registering components for REMOTE MODE (DVD, CBL,DSS/SAT, VCR, TV, OTHERS) keys.1 For DVD, CBL, DSS/SAT, VCR or TV keys;Hold down the SOURCE key and press the numeric keys toenter the setup code.• Example: Press “805” to register a DVD player manufactured byKENWOOD.• If you push an invalid key, the remote control will display“ERROR” and exit the setup mode.2 The OTHERS key enables you to operate another DVD, CBL,DSS/SAT, VCR or TV component.For OTHERS key;Hold down the OTHERS key and press the numeric keys toenter the setup code.• Example: After you have registered the KENWOOD DVD player,press “804” to register another DVD player which is manufacturedby Panasonic.• If you push an invalid key, the remote control will display“ERROR” and exit the setup mode.3Press any of the REMOTE MODE key and then press theSOURCE key to check that the component you want tocontrol turns on.If the component does not react, and there is more than onesetup code, enter another setup code and try again.• If the component is already on, pressing the SOURCE key willturn it off.4Repeat steps 2to 3to register additional components untilall components have been registered.Alternative REMOTE MODE key .This operation is optional and is convenient when you link an INPUTSELECTOR key to the REMOTE MODE key. While operating onecomponent, the INPUT SELECTOR key functions as an alternativeREMOTE MODE key to select another component.• Example: REMOTE MODE (DVD) key can be linked to the INPUTSELECTOR (VIDEO 1) key as described below;1 After registering the setup code, press and hold the SOURCEkey and then press the REMOTE MODE (DVD) key.2 While holding down SOURCE press the INPUT SELECTOR(VIDEO 1) key.• Now the VIDEO 1 key will function as a DVD key which can beselected at the same time while operating a CD player.• Repeat step 1 to 2 to link other INPUT SELECTOR keys.NoteAlthough each setup code is designed to work with a number ofdifferent models, certain codes may not work with some models.(Also, certain codes may only operate some of the functions availableon a given model.)Basic remote control operations for other componentsLCD panelfor VR-6060 only.