Kenwood KRF-X9090D Instruction Manual

Also see for KRF-X9090D: Service manual Instruction manual

Contents

24 EN3 Measure the distance from the listening position to each ofthe speakers.Jot down the distance to each of the speakers.Distance to Front Left Speaker (L) : ____ meters (feet)Distance to Center Speaker (C) : ____ meters (feet)Distance to Front Right Speaker (R) : ____ meters (feet)Distance to Surround Right (SR) : ____ meters (feet)Distance to Surround Back Right (SBR) : ____ meters (feet)Distance to Surround Back (SB) : ____ meters (feet)Distance to Surround Back Left (SBL) : ____ meters (feet)Distance to Surround Left (SL) : ____ meters (feet)Distance to Subwoofer (SW) : ____ meters (feet)• If you have selected “SB NML/THXx1” or ”SB LARGEx1”,“SBR” and “SBL” are not appeared but “SB” is appeared on theDisplay.4 Use the 5/∞ keys or MULTI @/# keys to select the speakersand the MULTI CONTROL knob or MULTI %/fi keys to adjustthe distance to the Front Speakers.The speaker indicator to be adjusted blinks.LSL S SB SRC RSP MUTEA B CLIPSWLFESTEREOIndication in meters• The allowable setting range is 0.03 to 9.14 meters (0.1 to 30.0feet), adjustable in about 0.03 meters (0.1 foot) increments.5 Repeat steps 4 to input the distance for each of the speakers.6 Press the MEMORY/ENTER key or the ENTER key to return tothe “SP DISTANCE“ display.• The speakers you have selected should appear on the display.Confirm that all the speakers have been correctly selected.4Exit the MANUAL SETUP mode.1 Press the 5/∞ keys or MULTI @/# keys to select the “RE-TURN“L RSP MUTEA B CLIPSL S SB SRSTEREO2 Press the MEMORY/ENTER key or the ENTER key to return tothe “MANUAL SETUP“ display.Preparing for surround sound Other settings1Adjust the Subwoofer RE-MIX.1 Press the 5/∞ keys or MULTI @/# keys to select the “SW RE-MIX“ and press the MEMORY/ENTER key or the ENTER key.2 Use the MULTI CONTROL knob or MULTI %/fi keys to selectthe appropriate Subwoofer re-mix setting.If “SW RE-MIX ON” is selected as the subwoofer re-mix setting,the low frequencies are enhanced by adding the low frequenciesof other channels to the subwoofer channel depending on thespeaker setup.1 SW RE-MIX ON : Subwoofer re-mix setting mode to thereceiver is ON.2 SW RE-MIX OFF : Subwoofer re-mix setting mode to thereceiver is OFF.• If Subwoofer is turned off or “FRNT NML/THX” is selected at theFront Speaker setting, Subwoofer re-mix setting is not visible.• By selecting “SW RE-MIX OFF”, the low frequencies will playthrough the Front Speakers only.This selection is preferred by THX.3 Press the MEMORY/ENTER key or the ENTER key to acceptthe setting.2Select the CROSSOVER frequency.CROSSOVER function is to adjust the receiver’s audio output charac-teristics with the speakers’ characteristics which differs dependingon the size of the speakers. You will be able to enjoy a more naturaland dynamic sound experience even with small size speakers.1 Press the 5/∞ keys or MULTI @/# keys to select the “CROSSOVER“ and press the MEMORY/ENTER key or the ENTERkey.• CROSSOVER function will not be available when “LARGE” isselected for all the speakers in step 1 and “SW RE-MIX OFF”is selected . ™2 Use the MULTI CONTROL knob or MULTI %/fi keys to selectthe CROSSOVER frequency.1 FREQ. : 40Hz2 FREQ. : 60Hz3 FREQ. : 80Hz-THX4 FREQ. : 100Hz5 FREQ. : 120Hz6 FREQ. : 150Hz• If you have THX certified speakers, select ”FREQ.:80Hz-THX”.L RSP MUTEA B CLIPSTEREO3 Press the MEMORY/ENTER key or the ENTER key to acceptthe setting.3Adjust the distance between left and right Surround Backspeaker.This mode is avaiable only when “SB NML/THXx2“ or “SB LARGEx2“has been selected in Surround Back Speaker setting.1 Press the 5/∞ keys or MULTI @/# keys to select the “SBSPACING“ and press the MEMORY/ENTER key or the ENTERkey.