Kenwood KRF-X9090D Instruction Manual

Also see for KRF-X9090D: Service manual Instruction manual

Contents

7 ENNames and functions of partsRemote control unitThis remote control unit can be used not only for Kenwood products but also for other non-Kenwood products by setting the appropriate manufacturer’ssetup codes. e1 LCD (Liquid Crystal Display) eShows the operation mode of the remotecontrol unit.2 RECEIVER ON key (Use to turn the receiver on.RECEIVER STANDBY keyUse to turn the receiver off (standby).3 Input Selector keys (DVD/6CH, VIDEO 1,VIDEO 2, VIDEO 3, CD/DVD, MD/TAPE, PHONO,AV AUX, TUNER) §Used to select the input sources.Source keys (DVD/6CH, VIDEO 1, VIDEO 2,VIDEO 3, CD/DVD, MD/TAPE, PHONO, AVAUX, TUNER) etUse to select registered components.4 ACTIVE EQ key ¶Use to select ACTIVE EQ setting.5 Numeric keysUse to input numeric characters. eUse to select preset radio stations. ⁄Use to operate other components.6 TONE key •Use to switch the status of TONE control.BASS BOOST key •Use to select the maximum adjustmentsetting for the low frequency range.LOUDNESS key •Use to switch the status of LOUDNESS.AUDIO keySUBTITLE keyANGLE keyUse to operate other components.7 MULTI %/fi/@/# keysUse to control a variety of settings.Use to operate other components.TOP MENU keyMENU keyRETURN keyEXIT keyON SCREEN keyGUIDE keyUse to operate other components.ENTER keyUse to establish a selection.Use to operate other components.SETUP key (Use to select the speakers’ settings etc.SOUND key ‚Use to adjust the sound quality and theambience effects.8 DIMMER key wUse to adjust the brightness of the display.8 keyUse to operate other components.9 P.CALL 4/¢ keys ⁄Use for selection adjustments during sound,set up and preset channel functions.CHANNEL –/+ keysUse to select the channels.0 LISTEN MODE %/fi keys ‡Use to select the listening mode.! INPUT MODE key 8Use to select the Input mode.@ DISC SEL. keyINPUT SEL. keyUse to operate other components.# TV keyUse to turn the TV on or off.$ SOURCE keyUse to turn the other source components onor off.% TV MODE keyUse to select the TV equipment.^ RCV MODE keyUse to switch the remote control unit to thereceiver control mode.& TV INPUT keyUse to select TV’s input.* TV MUTE keyUse to temporarily mute the TV sound.( TV VOL. %/fi keysUse to adjust the TV’s volume.) MUTE key •Use to temporarily mute the sound.¡ VOLUME %/fi keys §Use to adjust the receiver’s volume.™ BAND key ºUse to select the broadcast band.3/8 keyUse to operate the DVD, CD, MD or VCRcomponent.AUTO/MONO key ºUse to select the auto or manual tuningmode.7 keyUse to operate the DVD, CD, MD or VCRcomponent.£ SLEEP key wUse to set the Sleep timer.÷ keyUse to operate the MD or VCR components.¢ TUNING 1/¡ keys ºUse to tune the broadcast station.∞ DSP MODE key °Use to select any of the DSP mode.DOLBY VIRTUAL key ·Use to select the Dolby Virtual Speaker andthe Dolby Headphone setting.STEREO key °Use to switch the listen mode to STEREO.THX key ‡Use to switch the status of THX.§ PAGE %/fi keysUse to operate other components.RDS DISP. key ¤Use to receive RDS broadcast.PTY key ‹Use for PTY search.¶ LEARN keyUse to register other components. eUse to memorize the operation of the otherremote code. t• DISC SKIP keyLAST keyUse to operate other components.STANDBYRECEIVERSOURCE TVVIDEO2VIDEO1DVD/6CHPHONOMD/TAPECD/DVDRCV MODEACTIVE EQTUNERTV INPUTTV MUTEINFOLOUDNESSANGLEBASS BOOSTSUBTITLETONEAUDIOTOP MENU/SETUPRETURN/EXITON SCREEN/GUIDEMENU/SOUNDENTERBAND– CHANNEL +MULTIMULTIDIMMERDSP MODE RDS DISP.DOLBY VIRTUALAUTO/MONO SLEEPPAGETHXSTEREOLISTEN MODELEARNLASTINPUT SEL.DISC SKIP PTYDISC SEL.INPUT MODEONVIDEO3AV AUXTV MODETV VOL.MUTEP.CALL TUNINGVOLUME