Kenwood KRF-X9090D Instruction Manual

Also see for KRF-X9090D: Service manual Instruction manual

Contents

4 ENUnpackingUnpack the unit carefully and make sure that all accessories arepresent.FM indoor antenna (1) AM loop antenna (1)Remote control unit (1) Batteries (R03/AAA) (2)RC-R0918EMicrophone for SETUP (1)(Cord length: approx. 5m)If any accessories are missing, or if the unit is damaged or fails to operate,notify your dealer immediately. If the unit was shipped to you directly,notify your shipper immediately. Kenwood recommends that you retainthe original carton and packing materials in case you need to move or shipthe unit in the future.Keep this manual handy for future reference.Preparing the remote controlLoading the batteries1 Remove the cover. 2 Insert the batteries.3 Close the cover.• Insert two AAA-size (R03) batteries as indicated by the polaritymarkings.OperationWhen the standby indicator is lit, the power turns ON when you press theRECEIVER ON key on the remote control. When the power comes ON,press the key you want to operate.RECEIVER ON6 m• When pressing more than one remote control key successively, pressthe keys securely by leaving an interval of 1 second or more betweenkeys.Notes1. The supplied batteries may have shorter lives than ordinary batteriesdue to use during operation checks.2. When the remote-controllable distance gets shorter than before,replace both batteries with new ones.3. Placing the remote sensor in direct sunlight, or in direct light from ahigh frequency fluorescent lamp may cause a malfunction.In such a case, change the location of the system installation toprevent malfunction.Remote sensorOperating range(Approx.)Infrared ray systemBefore applying the power