Kenwood KRF-X9090D Instruction Manual

Also see for KRF-X9090D: Service manual Instruction manual

Contents

6 ENTHX DOLBY VIRTUAL STEREO INPUT MODEBASS BOOST DSP ACTIVE EQ DIMMERMULTI CONTROL LISTEN MODEINPUTSELECTORVOLUME CONTROLAV AUX/GAMESOUND TONE SETUPBANDAUTO/MONO MEMORY/ENTERA SPEAKERS BPHONESTHX96kHz fsACTIVE EQDOLBY DIGITALDTSDSPS VIDEO VIDEO L-AUDIO-RLSL S SB SRC RSP MUTE6CH INPUTDIGITAL DOLBY DIGITAL EXDOLBY EXDOLBY PL II xDOLBY HDOLBY VSDTS 96/24ES MATRIX6.1ES DISCRETE6.1STEREO96kHzfsLOUDNESSNEO:6SLEEPCLIPAUTO DETECTAUTORDSPTYMEMORYSTEREOTUNEDSWLFEA BTHXSurround EXDSP MODESETUP MICPOWER-ON –OFFNames and functions of partsMain unitDisplay*Input channel indicatorsOutput channel indicatorsAUTO indicatorMEMORY indicatorSTEREO indicatorTUNED indicatorFrequency displayInput displayPreset channel displaySurround mode displaySpeakerindicators RDS indicatorsMUTEindicatorCLIPindicator Input modeindicatorsListen mode indicatorsSLEEP indicatorStandby modeWhile the standby indicator is lit, a small amount of power is supplied tothe system to back up the memory. This is called standby mode.Under the condition, the system can be turned ON by remote control unit.* Input channelindicatorsInput channel indicatorslight up according to theincoming audio signals."S" indicator will light upwhen the surround com-ponent of the audio sig-nals is only 1 channel.The figure is the view when the front cover is open.1 POWER ON/OFF key (Use to turn the main power on or off.2 (POWER ON/STANDBY) key (Use to turn the power ON/STANDBY whenthe Power is turned ON.Standby indicator3 SPEAKERS A/B keys §Use to turn the A/B speakers on or off.4 THX indicator ‡Lights when the THX mode has been chosen.96kHz fs indicator qLights when the receiver is in the 96kHzLPCM playback mode.ACTIVE EQ indicator ¶Lights when the ACTIVE EQ is ON.DOLBY DIGITAL indicator ‡Lights when the receiver is in the DolbyDigital mode.DTS indicator ‡Lights when the receiver is in the DTS mode.DSP indicator °Lights when the receiver is in the DSP mode.5 INPUT SELECTOR key §Use to select input sources.6 VOLUME CONTROL knob §7 SETUP MIC jack (Use for SETUP MIC.8 PHONES jack •Use for headphone listening.9 THX key ‡Use to switch the status of THX.DOLBY VIRTUAL key ·Use to select the Dolby Virtual Speaker andthe Dolby Headphone setting.STEREO key °Use to switch the listen mode to STEREO.INPUT MODE key 8Use to select the Input mode.BASS BOOST key •Use to select BASS BOOST setting.DSP key °Use to select any of the DSP mode.ACTIVE EQ key ¶Use to select ACTIVE EQ setting.DIMMER keyUse to adjust the brightness of the display.wUse to select the REC MODE. ª0 SOUND key ‚Use to adjust the sound quality and theambience effects.TONE key •Use to switch the status of TONE control.BAND key ºUse to select the broadcast band.AUTO/MONO key ºUse to select the auto or manual tuningmode.! SETUP key (Use to select the speakers' settings etc.MEMORY/ENTER keyUse to store radio stations in the presetmemory. ⁄Use to establish a selection.@ 5/∞ keys (‚Use for selection adjustments during soundand setup functions.# MULTI CONTROL knobUse to control a variety of settings.$ LISTEN MODE knob ‡Use to select the listening mode.% AV AUX/GAME key *§Use to switch the input to AV AUX or GAME.^ AV AUX (S VIDEO, VIDEO, L-AUDIO-R)jacks *