Kenwood KRF-X9090D Instruction Manual

Also see for KRF-X9090D: Service manual Instruction manual

Contents

64 ENFor your recordsRecord the serial number, found on the back of the unit, in the spacesdesignated on the warranty card, and in the space provided below. Referto the model and serial numbers whenever you call upon your dealer forinformation or service on this product.Model __________________ Serial Number ________________________Notes1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).Specifications Caution : Read this page carefully to ensure safeoperation.AUDIO sectionFor EuropeRated power output during STEREO operationIEC (20 Hz ~ 20 kHz, 0.09% T.H.D., at 6 ΩΩΩΩΩ) ........ 100 W + 100 WDIN (1 kHz at 6 ΩΩΩΩΩ) ...................................................... 120 W + 120 WEffective power output during STEREO operationRMS (1 kHz, 10% T.H.D., at 6 Ω) ............................. 150 W + 150 WEffective power output during SURROUND operationFRONT( 20 Hz ~ 20 kHz, 0.09 % T.H.D., at 6 Ω one channel driven)............................................................................... 100 W + 100 W(1 kHz, 0.7 % T.H.D., at 6 Ω one channel driven) .. 120 W + 120 W(1 kHz, 10 % T.H.D., at 6 Ω one channel driven) ... 150 W + 150 WCENTER(20 Hz ~ 20 kHz, 0.09 % T.H.D., at 6 Ω one channel driven) ..... 100 W(1 kHz, 0.7 % T.H.D., at 6 Ω one channel driven) .................. 120 W(1 kHz, 10 % T.H.D., at 6 Ω one channel driven) ................... 150 WSURROUND( 20 Hz ~ 20 kHz, 0.7 % T.H.D., at 6 Ω one channel driven)............................................................................... 100 W + 100 W(1 kHz, 0.7 % T.H.D., at 6 Ω one channel driven) .. 120 W + 120 W(1 kHz, 10 % T.H.D., at 6 Ω one channel driven) ... 150 W + 150 WSURROUND BACK( 20 Hz ~ 20 kHz, 0.7 % T.H.D., at 6 Ω one channel driven)............................................................................... 100 W + 100 W(1 kHz, 0.7 % T.H.D., at 6 Ω one channel driven) .. 120 W + 120 W(1 kHz, 10 % T.H.D., at 6 Ω one channel driven) ... 150 W + 150 WTotal harmonic distortion ....................... 0.009 % (1 kHz, 50 W, 6 ΩΩΩΩΩ)For AustraliaRated power output during STEREO operationIEC (20 Hz ~ 20 kHz, 0.09% T.H.D., at 8 ΩΩΩΩΩ) ........ 100 W + 100 WDIN (1 kHz at 8 ΩΩΩΩΩ) ...................................................... 120 W + 120 WEffective power output during STEREO operation(1 kHz, 10% T.H.D., at 8 Ω) ...................................... 130 W + 130 WEffective power output during SURROUND operationFRONT( 20 Hz ~ 20 kHz, 0.09 % T.H.D., at 8 Ω one channel driven)............................................................................... 100 W + 100 W(1 kHz, 0.7 % T.H.D., at 8 Ω one channel driven) .. 120 W + 120 W(1 kHz, 10 % T.H.D., at 8 Ω one channel driven) ... 130 W + 130 WCENTER(20 Hz ~ 20 kHz, 0.09 % T.H.D., at 8 Ω one channel driven) ..... 100 W(1 kHz, 0.7 % T.H.D., at 8 Ω one channel driven) .................. 120 W(1 kHz, 10 % T.H.D., at 8 Ω one channel driven) ................... 130 WSURROUND( 20 Hz ~ 20 kHz, 0.7 % T.H.D., at 8 Ω one channel driven)............................................................................... 100 W + 100 W(1 kHz, 0.7 % T.H.D., at 8 Ω one channel driven) .. 120 W + 120 W(1 kHz, 10 % T.H.D., at 8 Ω one channel driven) ... 130 W + 130 WSURROUND BACK( 20 Hz ~ 20 kHz, 0.7 % T.H.D., at 8 Ω one channel driven)............................................................................... 100 W + 100 W(1 kHz, 0.7 % T.H.D., at 8 Ω one channel driven) .. 120 W + 120 W(1 kHz, 10 % T.H.D., at 8 Ω one channel driven) ... 130 W + 130 WTotal harmonic distortion ....................... 0.009 % (1 kHz, 50 W, 8 ΩΩΩΩΩ)Frequency responseCD/DVD ................................... 10 Hz ~ 100 kHz, +0 dB ~ –3.0 dBPHONO ‘RIAA’ response .............. 40 Hz ~ 20 kHz, +1.5 dB ~ –3.0 dBMaximum input levelPHONO (MM) .................................. 40 mV, 1 % T.H.D., at 1 kHzSignal to noise ratio (IHF’66)PHONO (MM) ........................................................................ 75 dBCD/DVD ................................................................................. 95 dBInput sensitivity / impedancePHONO (MM) ........................................................... 4 mV / 47 kΩΩΩΩΩCD/DVD, MD/TAPE, AV AUX, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH.............................................................................. 300 mV / 47 kΩΩΩΩΩOutput level / impedanceREC OUT (MD/TAPE) ............................................ 300 mV / 1 kΩΩΩΩΩPRE OUT (FRONT) ....................................................... 1 V / 500 ΩΩΩΩΩPRE OUT (CENTER) .................................................... 1 V / 500 ΩΩΩΩΩPRE OUT (SURROUND) .............................................. 1 V / 500 ΩΩΩΩΩPRE OUT (SURROUND BACK) ................................... 1 V / 500 ΩΩΩΩΩPRE OUT (SUBWOOFER) .......................................... 1 V / 500 ΩΩΩΩΩTone controlBASS ................................................................ ±10 dB (at 100 Hz)TREBLE ............................................................ ±10 dB (at 10 kHz)Loudness controlVOLUME at –30 dB level ...................................... +6 dB (100 Hz)DIGITAL AUDIO sectionSampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHzInput level / impedance / wave lengthOptical .............................. –15 dBm ~ –24 dBm, 660 nm ±30 nmCoaxial ................................................................... 0.5 Vp-p / 75 ΩΩΩΩΩOutput level / impedance / wave lengthOptical .............................. –21 dBm ~ –15 dBm, 660 nm ±30 nmVIDEO sectionVIDEO inputs / outputsVIDEO (composite) ................................................. 1 Vp-p / 75 ΩΩΩΩΩS VIDEO inputs /outputsS VIDEO (luminance signal) ................................... 1 Vp-p / 75 ΩΩΩΩΩS VIDEO (chrominance signal) ....................... 0.286 Vp-p / 75 ΩΩΩΩΩCOMPONENT VIDEO inputs/ outputsCOMPONENT VIDEO (luminance signal) ............. 1 Vp-p / 75 ΩΩΩΩΩCOMPONENT VIDEO (CB/CR-signal) ................. 0.7 Vp-p / 75 ΩΩΩΩΩFM tuner sectionTuning frequency range ................................. 87.5 MHz ~ 108.0 MHzUsable sensitivityMONO ................... 1.3 μV (75 ΩΩΩΩΩ)/ 13.2 dBf (40 kHz dev, S/N 26 dB)STEREO ............ 45 μV (75 ΩΩΩΩΩ)/ 42.1 dBf (40 + 6 kHz dev, S/N 46 dB)Total harmonic distortionMONO (1 kHz, 40 kHz dev) ....................... 0.2% (65.2 dBf input)STEREO (1 kHz, 40 + 6 kHz dev) ............... 0.8% (65.2 dBf input)Signal to noise ratio (DIN weighted at 1 kHz)MONO ........................................................ 65 dB (65.2 dBf input)STEREO ..................................................... 60 dB (65.2 dBf input)Stereo separation (1 kHz) ........................................................... 36 dBSelectivity (DIN ±300 kHz) .......................................................... 64 dBFrequency response (30 Hz ~ 15 kHz) .................... +0.5 dB, –3.0 dBAM tuner sectionTuning frequency range ..................................... 531 kHz ~ 1,602 kHzUsable sensitivity (30% mod, S/N 20 dB) ......... 16 μV / (600 μV/m)Signal to noise ratio (30% mod, 400 Hz) .... 50 dB (60 dBμV EMF input)GENERALPower consumptionFor Europe ............................................................................ 330 WFoe Australia ........................................................................ 300 WStandby Power consumption .................................. Less than 2.0 WAC outletSWITCHED .......................................................... total 90 W max.Dimensions ..................................................... W : 440 mm (17-5/16")H : 166 mm (6-9/16")D : 396 mm (15-9/16")Weight (Net)For Europe ........................................................... 12.3 kg (27.1 lb)For Australia ........................................................ 12.1 kg (26.6 lb)

/ 64

Related manuals for Kenwood KRF-X9090D