Kenwood NX-200 Service Manual

Also see for NEXEDGE NX-200: Brochure Instruction manual Instruction manual Specifications Instruction manual

NX-200(G)12DISASSEMBLY FOR REPAIRMain Parts Assembled Sheet/ CushionPart Name Part Number Part Name Part Number RemarkPlastic Cabinet (6-key) A02-4002-23 Sticker B42-7417-04 “NEXEDGE” is printed.Badge B43-1606-04 “KENWOOD” is printed.Plastic Cabinet (18-key) A02-4003-23 Fibrous Sheet (SP) G10-1373-04LCD ASSY B38-0923-05 Adhesive Sheet (LCD) J99-0714-04Used for fi xing the LCD ASSY on the Illumination Guide(LCD).Also used for fi xing the Illumination Guide (LCD) on theControl Unit.Cord ASSY (50-pinFPC) X42-3510-10 Cushion (50-pin FPC) G13-2293-04Speaker T07-0755-25Rubber Cushion (SP) G11-4272-14Sheet (SP) G11-4458-14Used for stabilizing the waterproof performance.“•” (a hole) on the Sheet (SP) shows the upper side (6-keyFPC side).Switch Unit (6-key FPC) X41-3840-10Adhesive Sheet(6-key FPC) J99-0745-04 Used for fi xing the Switch Unit (6-key FPC) from the backside of the Holder (FG-SP) before soldering.Adhesive Sheet(6-key FPC) J99-0712-14 Used for fi xing the Switch Unit (6-key FPC) on the Holder(FG-SP).Switch Unit (PTT FPC) X41-3830-10Sheet (PTT) G11-4428-04 Used for fixing the Push Knob (PTT) on the Switch Unit (PTTFPC) and stabilizing the waterproof performance.Adhesive Sheet(PTT FPC) J99-0711-04 Used for fi xing the Switch Unit (PTT FPC) on the Chassis.Chassis A10-4186-04Relay Hardware(VCO-Chassis) E29-1221-14 Used for stabilizing the shield performance of the VCO.Sheet (Air) G11-4500-04 This sheet is put on the leak check hole.This sheet lets air through, but does not let water through.Rubber Sheet (FET) G11-4429-04 Used for stabilizing the radiation performance of the FET.Sheet (Air) G11-4440-04 This sheet is a protect cover of the sheet (G11-4331-04).Cushion (ANT) G13-2220-04 Used for fi xing the Terminal ASSY.Terminal Block E72-0425-03 Adhesive Sheet(Terminal Block) J99-0747-04 Used for fixing the Terminal Block and the Packing (TerminalBlock).■Assembly information (Sheet/Cushion)When “Main Parts” is changed (ordered), “AssembledSheet/Cushion” should also be changed (ordered) to-gether.The Sticker and Sheet etc are non-reusable parts. It re-quires the new one to get the radio’s performance afterrepairs.For example, when “Plastic Cabinet (A02-4002-23 (6-key)/A02-4003-23 (18-key))” is changed, “Sticker (B42-7417-04)”, “Badge (B43-1606-04)” and “Fibrous Sheet (G10-1373-04)” should be ordered and changed together be-cause Sticker (B42-7417-04), Badge (B43-1606-04) andFibrous Sheet (G10-1373-04) are non-reusable.