Kenwood NX-5700 User Manual

Also see for NX-5800: Common Function Reference Function reference Installation guide User guide User guide

o Receiving Individual Calls (P25)When you receive an individual call on a Conventional channel, a ringing tone willsound and the display will show the caller’s ID. To respond to the call, press and holdthe PTT switch and speak into the transceiver as you would during a normal call.When you receive an individual call on a Trunking channel, a ringing tone will soundand the caller’s ID and “Incoming” appear on the display. To receive the call, pressthe PTT switch. To deny the call, press the key programmed as [Clear]. Afterreceiving the call, you can respond to the call by pressing and holding the PTT switchand speaking into the transceiver as you would during a normal call. After the call isfinished, press the key programmed as [Clear] to end the call.o Receiving Group Calls (NXDN)When you receive a group call on a Conventional channel and the received group IDmatches the ID set up on your transceiver, you can hear the caller’s voice.When on a Trunking channel, if the Group ID of a received call matches your GroupID, you will hear the call.o Receiving Individual Calls (NXDN)When you receive an individual call on a Conventional channel, a ringing tone willsound and the display will show the caller’s ID. To respond to the call, press and holdthe PTT switch and speak into the transceiver as you would during a normal call.When you receive an individual call on a Trunking channel, a ringing tone will soundand the caller’s ID and “Individual” appear on the display. To receive the call, pressthe PTT switch. To deny the call, press the key programmed as [Clear]. Afterreceiving the call, you can respond to the call by pressing and holding the PTT switchand speaking into the transceiver as you would during a normal call. After the call isfinished, press the key programmed as [Clear] to end the call.12