Kenwood NX-5700 User Manual

Also see for NX-5800: Common Function Reference Function reference Installation guide User guide User guide

TRUNKING CALLSNote:● Telephone calls can be made only in P25 Trunking Operation.MAKING A TELEPHONE CALLo AutodialAutodial allows you to quickly call numbers that have been programmed onto yourtransceiver.1 Press the key programmed as [Autodial] to enter Autodial Mode.Alternatively, press the key programmed as [Menu] to enter Autodial Mode using theMenu Mode.● The first entry in the Autodial list appears on the display.2 Press the [J] and [K] keys to select your desired Autodial list number.3 Press the PTT switch to make the call.o Manual Dialing1 Press the key programmed as [Autodial] to enter Autodial Mode.Alternatively, press the key programmed as [Menu] to enter Autodial Mode using theMenu Mode.● The last called unit appears on the display.2 Press the [ ] key to enter manual input mode.3 Enter your desired number.● You can select a digit by using the [J] and [K] keys, and then set the selected digit bypressing the [ ] key. Repeat this process to enter the entire number.Alternatively, on an optional microphone with keypad, you can enter the numberdirectly.4 Press the PTT switch to make the call.5 To end the call, press the key programmed as [Clear].o Selecting a Number from the List1 Press the key programmed as [Autodial] to enter Autodial Mode.Alternatively, press the key programmed as [Menu] to enter Autodial Mode using theMenu Mode.● The last called unit appears on the display.2 Press the [J] and [K] keys to select your desired list number.3 Press the PTT switch to make the call.RECEIVING A TELEPHONE CALL1 When a call is received, “Phone Call” will appear on the display.2 Press and hold the PTT switch to speak, and release it to receive.● Only one person can speak at a time.3 To end the call, press the key programmed as [Clear].32