Kenwood NX-5700 User Manual

Also see for NX-5800: Common Function Reference Function reference Installation guide User guide User guide

3 Press and hold the PTT switch to make the call.● Speak into the transceiver as you would during a normal call.● The LCD display will return to the zone and channel screen after call ends.o Making Group Calls (P25 Trunking)You can select a channel with the Talkgroup ID you wanted to call to make a call tothose parties on a Trunking channel.● If the traffic channel is busy, a busy message appears and the busy tone sounds. Releasethe PTT switch and wait for the channel to become free. When the traffic channel becomesfree, a proceed tone sounds.1 Select the configured Talkgroup channel using the keys programmed as[Channel Up]/ [Channel Down].2 Press and hold the PTT switch to make the call.● Speak into the transceiver as you would during a normal call.● The display will alternate between the called Group ID/ name and “Calling”.● The LCD display will return to the zone and channel screen after call ends.o Making Individual Calls (P25 Trunking)You can make calls to specific persons on a Trunking channel.1 Press the key programmed as [Individual], [Individual + Status] or [Individual+ Short Message] to enter Individual Call Mode.Alternatively, press the key programmed as [Menu] to enter Individual Call Mode usingthe Menu Mode.7