Kenwood NX-5700 User Manual

Also see for NX-5800: Common Function Reference Function reference Installation guide User guide User guide

Note:● Once the headset has been paired, it can be used automatically with the transceiver thenext time the transceiver and headset are powered on. If the headset cannot be usedautomatically, connect manually using the My Device setting in the Bluetooth menu of thetransceiver.(Some headset models cannot be used automatically.)● Up to 10 Bluetooth devices can be registered to your transceiver.o Making hands-free callPress the PTT switch to activate the microphone of the Bluetooth headset.Note:● The volume level can only be adjusted on the Bluetooth headset. The volume control ofthe transceiver does not function. However, if the audio is set to output from the built-inspeaker of the transceiver in the Bluetooth Speaker setting, the volume level is controlledby the transceiver.● The microphone sensitivity can be set using the External Mic Sense function..USEFUL FUNCTIONSThere are some useful functions on your transceiver which allows you to displayinformation of the Bluetooth devices registered to the transceiver and to switch thespeaker audio output.o Connecting/ Disconnecting/ Deleting a registered device using My DevicesPress the key programmed as [Menu] to enter Bluetooth My Devices Mode usingthe Menu Mode.To connect a device:1 Press the [ ] key or the [J] and [K] keys to select the device to connect to.45