2 Enter a code using the [J] and [K] keys.● On an optional microphone with keypad, you can enter the password directly bypressing the keypad.3 Press the [ ] key to accept the code.4 Repeat steps 2 and 3 to enter the entire password.● Press the [ ] key to delete an incorrectly entered code. Press and hold the [ ] keyto delete all codes.5 Press the [ ] key to confirm the entry.● If you enter an incorrect password, an error tone sounds and the transceiver remainslocked.● The password can contain a maximum of 6 digits.SELECTING A ZONE AND CHANNEL1 Select the desired zone using the keys programmed as [Zone Up]/ [ZoneDown]. Each zone contains a group of channels.2 Select the desired channel using the keys programmed as [Channel Up]/[Channel Down]. Each channel is programmed with settings for transmitting andreceiving.● The transceiver may have names programmed for zones and channels. The zonename and channel name can contain up to 16 and 14 characters respectively.4