Kenwood NX-700 Instruction Manual

Also see for NEXEDGE NX-800 series: Brochure Function reference Instruction manual Instruction manual Specifications

Kenwood NX-700 Instruction Manual Manual pdf 19 page image

11RECEIVING1 Select the desired zone and channel using the Zone Up/ Zone Down or CH/GID Up/ CH/GID Down keys. (If the Scan function has been programmed, youcan switch it on or off as desired.)2 When you hear a caller’s voice, readjust the volume as necessary.• If signaling has been programmed on the selected channel, you will hear a call onlyif the signaling tone matches the tone set up on your transceiver.Note: Signaling allows your transceiver to code your calls. This will prevent you from listeningto unwanted calls. It does not make calls private, it only prevents them from being heard bytransceivers set with a different signaling code. Refer to “SIGNALING” on page 24 for details.■ Receiving Group Calls (Digital)When you receive a group call on a Conventional channel and the received groupID matches the ID set up on your transceiver, you can hear the caller’s voice.When you receive a group call on a Trunking channel, the transceiverautomatically switches to the communications channel to receive the call.• Readjust the volume as necessary.■ Receiving Individual Calls (Digital)When you receive an individual call on a Conventional channel, a ringing tonewill sound and the display will show the caller’s ID. To respond to the call,press and hold the microphone PTT switch and speak into the transceiver asyou would during a normal transmission.When you receive an individual call on a Trunking channel, a ringing tone willsound and the caller’s ID will appear on the display. After receiving the call, youcan respond to the call by pressing and holding the microphone PTT switch andspeaking into the microphone as you would during a normal transmission.