Kenwood NX-700 Instruction Manual

Also see for NEXEDGE NX-800 series: Brochure Function reference Instruction manual Instruction manual Specifications

Kenwood NX-700 Instruction Manual Manual pdf 25 page image

17FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTIONFleetSync is an Alphanumeric 2-way Paging Function, and is a protocol owned byJVC KENWOOD Corporation. FleetSync enables a variety of paging functionson your transceiver, some of which depend on dealer programming.Your dealer can set up either FleetSync or FleetSync II on your transceiver.Transceivers set up with FleetSync can communicate with other transceivers thathave been set up with FleetSync. Likewise, transceivers set up with FleetSync IIcan communicate with other transceivers set up with FleetSync II. However,transceivers set up with FleetSync cannot communicate with transceivers thathave been set up with FleetSync II, and vice-versa.Note: This function is available only in analog operation.SELCALL (SELECTIVE CALLING)A Selcall is a voice call to a particular station or to a group of stations.■ Transmitting1 Select your desired zone and channel.2 Press the key programmed as Selcall or Selcall + Status to enter Selcallmode.3 Press the / keys to select the ID of the station you want to call.• If Manual Dialing is enabled, you can enter the station ID by using themicrophone keypad, or by using the / keys. When using the / keys,cycle through the digits to select a digit, then press the key to setthe digit and move the cursor to the right. Repeat this process until theentire ID is entered.4 Press the microphone PTT switch and begin your conversation.■ ReceivingAn alert tone will sound and the transceiver will automatically enter SelcallMode.The calling station’s ID will appear when a Selcall is received. When the callstation’s ID appears on the display, you can respond to the call by pressing themicrophone PTT switch and speaking into the microphone.