Kenwood NX-700 Instruction Manual

Also see for NEXEDGE NX-800 series: Brochure Function reference Instruction manual Instruction manual Specifications

Kenwood NX-700 Instruction Manual Manual pdf 24 page image

16SCAN REVERTThe Scan Revert channel is the channel selected when you press the microphonePTT switch to transmit during scan. Your dealer can program one of the followingScan Revert channels:• Last Called + Selected: The last channel on which you received a call isassigned as the new revert channel. If the channel has been changed, thenewly selected channel is assigned as the new revert channel.• Selected: The last channel selected is assigned as the new revert channel.• Selected + Talkback: If the channel has been changed, the newly selectedchannel is assigned as the new revert channel. The transceiver “talks back” onthe current channel.• Priority 1/ Priority 2: If your dealer has programmed a Priority channel (eitherPriority 1 or Priority 2), this channel is the revert zone and channel.• Priority 1 + Talkback/ Priority2 + Talkback: If your dealer has programmeda Priority channel (either Priority 1 or Priority 2), this channel is the revert zoneand channel. The transceiver “talks back” on the current receive channel.SCAN DELETE/ADDYou can add and remove zones and/or channels/group IDs to and from your scanlist.1 Select your desired zone and/or channel/group ID.2 Press the key programmed as Zone Delete/Add (to add/remove zones) orScan Delete/Add (to add/remove channels/group IDs).• You can also press and hold the key programmed as Scan Delete/Add to add/remove zones.PRIORITY-CHANNEL SELECTIf the Priority channel has been set as Operator Selectable by your dealer, you arealso able to reprogram the Priority mode.1 Select your desired zone and channel.2 Press the key programmed as Priority-chanel Select, or press and hold thekey programmed as Scan.• A list of channel types appears on the display.3 Press the / keys to select the channel type for your current channel.• You can set the channel as “NORMAL”, “PRIORITY 1”, “PRIORITY 2”, or“PRIORITY 1&2”.4 Press the key to save the setting and exit Priority-channel Select Mode.