Kenwood RD-K511USB Instruction Manual

Contents

Kenwood RD-K511USB Instruction Manual Manual pdf 20 page image

38 K-511USB/RD-K511USB 39EnglishProgram playbackAudio files can be played in the order programmedby the user.Select the USB source and enter stop mode.1 Select "PGM" (program play mode).Press [P.MODE].Each press switches the selection.Folder play modeProgram play modePGM litN litNormal play modeNot lit2 Select a file.Press [MULTI CONTROL] or thenumeric button(s) to select the file,then press [ENTER].Use [MULTI CONTROL] to select, thenpress [ENTER].When the 4th file infolder "005" is selectedas the first track of theprogram:If you committed a mistake in selection, press[CLEAR] on the remote control unit beforepressing [ENTER] and restart selection.Up to 32 files can be programmed.For how to select it, see "Folders and files" on page26.•••Folder play modeThe system can be set to a mode for playback perfolder. In this mode, the system plays only theselected folder and stops after all of its files havebeen played.Select the USB source and enter stop mode.1 Select "N" (folder play mode).Press [P.MODE].Each press switches the selection.Folder play modeProgram play modePGM litN litNormal play modeNot lit2 Select the folder to be played.Press [MULTI CONTROL].For how to select it, see "Folders and files" on page26.3 Start playback.Press [USBE].To cancel the folder play mode:Stop playback and press [P.MODE] to select thenormal play mode.••■Playing a USB device3 Start playback.Press [USBE].To clear a music fi le from the program:Stop playback and press [CLEAR]. Each pressclears the currently last track in the program.To add an audio file in the program:Stop playback and perform the operation in steps2 and 3.To cancel program playback:Stop playback and press [P.MODE] to select thenormal play mode. The program is cleared at thistime.The program is cleared when the system is turned OFFor the USB device used in programming is disconnected.■■■•Playing music tracks