Kenwood RD-K511USB Instruction Manual

Contents

Kenwood RD-K511USB Instruction Manual Manual pdf 24 page image

46 K-511USB/RD-K511USB 47EnglishListening to Radio BroadcastingPresetting stations manually(Manual Preset)The FM/AM station being tuned can be preset inmemory by specifying the preset No. If a stationis preset in a preset No. in which another stationhas already been preset, the existing setting isoverwritten and replaced with the new setting.1 Tune the radio station to be presetin memory.Tune with auto tuning or manual tuning. (page44)2 Enter the tuned station.Press [ENTER].3 Select the desired preset number(P01 to P40).Press [G/H].Press [MULTI CONTROL C/D].When preset No. P35 isselected:The preset number can also be entered directly.Press the numeric button(s) to select.To select preset No. P35Press [+10] three times and [5] once.•4 Preset a radio station.Press [ENTER].To preset other stations, repeat steps 1 to 4 for eachof them.Even when a station is preset, it cannot be tuned if theradio wave condition is poor.••Presetting stationsautomatically (Auto Preset)Radio stations can be preset automatically inpreset channels.Stations cannot be preset if other audio source isselected.Up to 40 stations can be preset in the system.Select the FM or AM band.For use of the RDS function, stations must bememorized by AUTO MEMORY.1 Enter the Tool menu.Press [TOOL].2 Select "AUTO MEMORY".Press [MULTI CONTROL A/B]to select, then press [ENTER].The station is presetin memory and thesystem enters the statusof reception of presetstation No. P01."AUTO MEMORY" blinks on the display and thereceivable radio stations are preset automatically.RDS stations are given priority during auto presetting. Ifthere is memory left after presetting, this unit continuespresetting regular FM and AM stations.A broadcast station that cannot be preset with AUTOMEMORY should be set with Manual preset. (page 45)••••••Playing music tracks