Kenwood RD-K511USB Instruction Manual

Contents

Kenwood RD-K511USB Instruction Manual Manual pdf 40 page image

KENTERRETURNSETUPTIMER SETMULTI CONTROL78 K-511USB/RD-K511USB 79EnglishSetting the program timer(TIMER SETTING)The program timer can be used to record radiobroadcasting in SD1/SD2 at the specified day ofthe week and time of the day as well as to playradio broadcasting, CD or SD1.Up to fi ve timer programs can be set. The settingcontents can be variable between program numbers.Setting programs 1 to 3 (for exclusive usedin recording)Radio broadcasting can be recorded in SD1. Theseprograms are designed for exclusive used in timerrecording so their setting is easier than programs 4 and 5.The recording mode can be selected from SQ (standardquality) and SLQ (long-hour).Setting program 4 and 5 (for playback/recording)Radio broadcasting, CD or SD1 can be played with timer(TIMER PLAY). These programs are optimum for settingas a morning call.In addition, radio broadcasting can be recorded in SD1/SD2.The recording mode can be selected from HQ (highquality), SQ (standard quality) and SLQ (long-hour).Be sure to adjust the clock to the correct time. For theprocedure, see "Adjusting the time (TIME ADJUST)". (page77)1 Select "TIMER SETTING".Press [MULTI CONTROL A/B]to select, then press [ENTER].2 Select the PROGRAM number.Press [MULTI CONTROL A/B].•Each press switches the selection.PROGRAM 1 SETPROGRAM 2 SETPROGRAM 3 SETPROGRAM 4 SETPROGRAM 5 SETRETURNRecording fromTUNERto SD1Playback of TUNER/CD/SD1Recording fromTUNER to SD1/SD2The display returns to the"SYSTEM SETUP" display.3 Select the programming item.Press [MULTI CONTROL A/B].Each press switches the selection.When PROGRAM1, 2 or 3 is selected in step 2ON/OFFOPERATIONON TIMEOFF TIMEON VOLUMETUNER PRESETREC MODESet the day(s) of theweek.Select the recordingmode.Select timer ON/OFF.Select the ON time.Select the OFF time.Select the recordinglevel.Select a radio station.EXITThe display returns tothe "SYSTEM SETUP"display.For the programming items when PROGRAM4 or 5 is selected in step 2, see the "List ofprogramming items". (page 80)4 Enter the selection of programmingitem.Press [ENTER].5 Set the details of the programming item.For the detail setting operation, see "List ofprogramming items". (page 80)Set all of the necessary programming items byrepeating steps 3 to 5 for each.6 Turn the system OFF.Press [K].The standby and timeindicators also lightgreen.The clock should be readjusted when the power plug isdisconnected or after a power failure. (page 77)When recording of radio broadcasting is programmed,the first section of the broadcasting may be cut off if ONTIME is set exactly at the start time. To prevent this, it isrecommended to set ON TIME at about a minute earlierthan the start of the broadcasting to be recorded.When setting more than one timer program, reserve aninterval of at least 3 minutes between the time zones ofthe programs.To set using [TIMER SET] of the remote control unit:Press [TIMER SET].Each press switches the PROGRAM number.Select the desired PROGRAM number andperform steps 3 to 6.•••Advanced operationsMaking the system setup using the Setup menu