12 K-511USB/RD-K511USB 13EnglishMalfunction of thesystemIf the system does not function properly or the display shows erroneous information evenwhen the connections are made correctly, reset the system. (page 110)Connecting the AM loop antennaThe provided AM antenna is an indoor antenna. Install it as apart as possible from the main unit, TV set, speaker cordsand power cord and orient it in the direction that offers best reception condition.Connecting a antenna cordConnect the AM antenna code across the [AM] and[MGND] terminals as shown on the right.•Connecting the FM indoor antennaThe provided FM antenna is a simplified one for indoor use. To receive FM stations stably, it is recommended to use anoutdoor antenna (commercially available). Remove the simplified antenna before connecting the outdoor antenna.Connecting the speakersTreatment of the speaker cord extremitiesTwist and remove the vinyl coating on theextremity of each speaker cord.•Connecting a speaker cord to the main unit•Connecting the speaker cords to the speakers•Be careful not to short-circuit the + and – conductors of the speaker cord (be sure to avoid contact between the + and –conductors). If the speaker cord is connected by inverting the + and – polarity, the reproduced audio will be unnatural withunclear positioning of musical instruments.•Caution for outdoorantenna installationSince antenna installation necessitates skill and experience, always consult your dealerbefore installation. The antenna should be placed at a distance from the power distributionwires. Otherwise, an electric shock accident may occur if the antenna falls down.ConnectionsBasic connectionsBind one of the conductors of the AM loopantenna with a conductor of the FM indoorantenna by twisting them together, and insert thetwisted pair into the [MGND] terminal.Fit into the groove.AM loop antenna1Connect the [FM75Ω] and [MGND]terminals.2Find the antenna location that offersbest reception.3Fix the antenna in the found location.FM indoor antennaPower cordLS-K511 LLeft speakerCaution for connection Do not plug the power cord into the power outlet until all other connections arecompleted. Before unplugging a connected cord or cable, be sure to switch thesystem OFF and unplug the power cord from the power outlet in advance.LS-K511 RRight speakerWhite line on transparentcoatingWhite line on transparentcoatingRead before useTo AC wall outlet• Insert the plug firmly all theway into the AC wall outlet.