Kenwood TH-79A Instruction Manual

Also see for TH-79A: Instruction manual Instruction manual Instruction manual

STORING PAGE CODES-a Press [BAND] to select the Operating band.Press [F], [PAG] to switch ON the Page function.4 TurntheENCcontroltoselectPage memoryA.Enter yourStationcode(000to999) usingthenumerickeys.SelectPage memory1 to6 byturning theENCcontrol.Using the numeric keys, enter a 3-digitGroup codeor individual Station code.89To store additional Page codes, repeat Steps 6and 7.Press [CLR] to exit Code Select.You can immediately use the code that was stored orselected last.CALLINGThe squelch must be closed {page 16} on both bandsbefore beginning this procedure.123456Press [BAND] to select the Operating band.Tune to the prearranged frequency.Press [F], [PAG] to switch ON the Page function.Press [F], [PAG CODE] to select Code Select.Turn the ENC control to select the Page memorywhere the desired Group code or individualStation code has been stored.» Ifyou have not stored the desired Page code yet,select memory 0 and store the Page code now.Press and hold [PTT], then call the other stationafter the code transmission completes.Note:e Page may not function in the following situations:Page is switched ON for both the VHF and UHF banas.The other station is using a battery saver function.A repeater ID and the Page code are receivedsimultaneously.51