Kenwood TH-D72A Instruction Manual

Also see for TH-D72A: User manual Instruction manual Instruction manual Instruction manual Service manual

Contents

GPS – 5LOG SETUPQ Track Log Acquisition TypeYou can set the conditions for saving portable Trackinformation as GPS Logger.You can change the settings for travel speed, etc.1 Enter Menu mode and access Menu 230.2 Select “Time”, “Distance”, or “Beacon” for theRecord Method.3 Access Menu 231.4 Select an Interval time from 2 ~ 1800 seconds (insteps of 1 second).• The Interval setting is available only if the RecordMethod has been set to “Time”.5 Access Menu 232.6 Select a Distance from 0.01 ~ 9.99 (in steps of0.01).• The Distance setting is available only if the RecordMethod has been set to “Distance”.• The unites used for Distance can be set to miles (mi),kilometers (km) or nautical miles (nm).Interval and Log Total Time:PointQ'tyInterval time (second)2 5 10 15 30 28005000166.7 41.7 833.3 1250 2500 150000(min)2.8 6.9 13.9 20.8 28 2500(hour)Interval and Total Distance:PointQ'tyInterval distance (km)0.01 2.00 4.00 6.00 8.00 9.995000 50 10000 20000 30000 40000 49950(km)TARGET POINTYou can register positional information for a target point.1 Enter Menu mode and access Menu 240.2 Select a Target Point (from 1 ~ 5).3 Press [MHz]. The “in use” target point mark ( )appears to the left of the channel number.4 Access Menu 241.5 Enter a Target Point name (up to 8 characters).6 Access Menu 242. “dd°mm.mm’ ”> “dd°mm’ss.s” ”>7 Enter the north/ south latitude.8 Access Menu 243. “dd°mm.mm’ ”> “dd°mm’ss.s” ”>9 Enter the east/ west longitude.