Kenwood TH-D72A Instruction Manual

Also see for TH-D72A: User manual Instruction manual Instruction manual Instruction manual Service manual

Contents

APRS – 14Q QSY Transmission Operation1 Access Menu 3A0.2 Set it to “On”.3 Access Menu 3A1.4 Set it to “On” or “Off”.5 Access Menu 3A2.6 Set it to “On” or “Off”.Q Operation when Receiving a QSYWhen QSY (frequency) information is received, thestation list appears with the verified frequency. Select[Tune], then press [ OK].• The QSY (frequency) is set to the non data band.Note: When using 6.5 kHz or 12.5 kHz step values, the displaydoes not indicate values for 100 Hz and lower.SETTING PACKET FILTERQ Position LimitAccess Menu 3B0.If APRS is popular in your area, you may receive toomany APRS packets for a short period. If this disturbsyour APRS activities, specify a distance from yourlocation. You will not receive APRS packets fromstations beyond this distance.Select the range from 10 to 2500 in steps of 10, plusOFF (default). The unit is mile or kilometer dependingon the selection in Menu 3V0 (Units 1).Q Packet Filter Type1 Access Menu 3B1.2 Select the Filter type to “Weather ”, “Digipeater” ,“Mobile”, “Object”, “Navitra”, “1-WAY”, or “Others ” .3 Press [ OK].• When you press [MHz], the “ ” icon appears on theleft side of the Filter type.The APRS position data is filtered.• Check the type(s) you want to receive.• If all types are checked, you will receive all types of data.