15DIALING STORED DTMF NUMBERS1 Press the microphone key.• “ ” (TK-7160/ TK-8160) or “ ” (TK-7162/ TK-8162) appears on the display.2 Enter the desired memory location number (1 ~ 9).• The digits stored in the selected location number appear on the display.• To cancel, press any key other than the PTT switch.3 Press the PTT switch.• If programmed by your dealer, no DTMF tone will sound when “D” is transmitted.“D” can be used for a pause duration. The pause duration is programmed by yourdealer.CLEARING S TORED DTMF N UMBERS1 Press the microphone # key.• “ ” (TK-7160/ TK-8160) or “ ” (TK-7162/ TK-8162) appears on the display.2 Press the microphone # key again.• “ ” (TK-7160/ TK-8160) or “ ” (TK-7162/ TK-8162) appears on the display.• To cancel, press any key other than 1 ~ 9.3 Enter the memory location number (1 ~ 9) you want to clear.• The memory location number is cleared and the display returns to normal.REDIALING1 Press the microphone key.• “ ” (TK-7160/ TK-8160) or “ ” (TK-7162/ TK-8162) appears on the display.2 Press the microphone 0 key.• On TK-7160/ TK8160 transceivers, the digits last dialed appear on the display.(Nothing is displayed on TK-7162/ TK-8162 transceivers.)• If there is no data in the redial memory, an error tone will sound.• To cancel, press any key other than the PTT switch.3 Press the PTT switch.Note: Switching the transceiver power OFF clears the redial memory.S TUNThis function is used when a transceiver is stolen or lost. When the transceiverreceives a call containing a stun code, either transmit mode will be disabled, orboth receive mode and transmit mode will be disabled. The stun code iscancelled when the transceiver receives a call with a revive code.