225-TONE SIGNALING5-tone Signaling is enabled or disabled by your dealer. This function opens thesquelch only when the transceiver receives the 5 tones programmed in yourtransceiver. Transceivers that do not transmit the correct tones will not be heard.Note: Your transceiver functions include either 5-tone Signaling or FleetSync {page 19}, but not both.M Y IDYour dealer can program an ID number for your transceiver, to identify you to otherparties when you make a call. On TK-7160/ TK-8160 transceivers, if set by yourdealer, you can edit the ID number:1 If the ID number is set to be edited, the ID number will appear on the displaywhen you turn the transceiver power ON.2 To change the ID number, enter the new ID by pressing the and keys orusing the DTMF keypad.• When pressing the and keys to enter a digit, select the desired digit, thenpress the or C> key to shift the cursor to the left or right. Repeat this processuntil the entire ID is entered.3 Press the S or key to complete the entry.M AKING A SELCALL (SELECTIVE CALLING ) (TK-7160/ TK-8160 ONLY)A Selcall is a voice call to a particular station. To make a Selcall:1 Select your desired zone and channel.2 Press the key programmed as Selcall (5-tone) to enter Selcall Mode.3 Press the and keys or enter an appropriate number using the DTMFkeypad to select the ID of the station you want to call.• When pressing the and keys to enter a digit, select the desired digit, thenpress the or C> key to shift the cursor to the left or right. Repeat this processuntil the entire ID is entered.• Press and hold the 0 key to enter a Group digit.• Alternatively, press and hold the S or key to enter Selcall List mode. With theSelcall List activated, you can select the desired station by pressing the andkeys. Press and hold the key to toggle the display between the station nameand the list number.4 Press the S or key to complete the entry.5 Press the key programmed as Call 1 or Call 2 to begin your call.Note: Additionally, you can also use the keys programmed as Digit 1x Down, Digit 1x Up, Digit 10xDown, and Digit 10x Up keys to adjust the Selcall number. Digit 1x Up/Down increases/decreasesthe Selcall number by 1 each time the key is pressed. Digit 10x Up/Down increases/decreases theSelcall number by 10 each time the key is pressed.