Kenwood TK - 7160 Instruction Manual

Also see for TK-7160: Service manual Specifications Brochure & specs Service manual Instruction manual

Contents

24EMERGENCY OPERATIONIf your transceiver has been programmed with the Emergency function, you canmake emergency calls.1 Press and hold the key programmed as Emergency.• Depending on the delay time programmed into your transceiver, the length of timeyou must hold the Emergency key will vary.• When the transceiver enters Emergency mode, the transceiver will change to theEmergency channel and begin transmitting based on how the transceiver is set upby your dealer. Transmit periods are also set by your dealer.2 To exit Emergency mode, press and hold the Emergency key again.• If the Emergency mode completes the preset number of cycles, Emergency modewill automatically end and the transceiver will return to the channel that was in usebefore Emergency mode was entered.Note: Your dealer can set the transceiver to emit tones and received signals as normal or mute thespeaker during Emergency operation.LONE WORKER MODELone Worker Mode is a safety feature built into the transceiver. If the transceiveris not operated for a period of time that exceeds the programmed time, thetransceiver will emit a tone and automatically enter Emergency operation.The default Lone Worker duration is 10 minutes. Your dealer can set theduration to last from 1 minute to 60 minutes.The Lone Worker function can be toggled ON or OFF by pressing and holdingthe key programmed as Lone Worker for 2 seconds.