Kenwood TK - 7160 Instruction Manual

Also see for TK-7160: Service manual Specifications Brochure & specs Service manual Instruction manual

Contents

3I NSTALLING THE T RANSCEIVERFor passenger safety, install the transceiver securely using the supplied mounting bracket and screwset, so the transceiver will not break loose in the event of a collision.1 Mark the position of the holes in the dash by using the mounting bracket as atemplate. Drill the holes, then attach the mounting bracket using the supplied5 x 16 mm self-tapping screws.• Be sure to mount the transceiver in a location where the controls are within easyreach of the user and where there is sufficient space at the rear of the transceiverfor cable connections.2 Connect the antenna and the supplied power cable to the transceiver.3 Slide the transceiver into the mounting bracket and secure it using thesupplied hex-headed screws.4 Mount the microphone hanger in a location where it will be within easy reachof the user.• The microphone and microphone cable should be mounted in a place where theywill not interfere with the safe operation of the vehicle.When replacing the fuse in the DC power cable, be sure to replace it with a fuse of the same value.Never replace a fuse with one that is rated with a higher value.Hex-headed screwDC power cableMounting bracketAntennaconnectorPower inputconnectorFuseBlack (–) cableRed (+) cable12 V vehiclebatteryOptional microphone5 x 16 mmSelf-tapping screwSpring washerFlat washer