Kenwood TK-2180 Instruction Manual

Also see for TK-2180: Specifications Brochure & specs Instruction manual Service manual Pricing and specification manual

8Screw the antenna into theconnector on the top of thetransceiver by holding theantenna at its base and turning itclockwise until secure.Note: The antenna is neither ahandle, a key ring retainer, nor aspeaker/ microphone attachmentpoint. Using the antenna in theseways may damage the antenna anddegrade your transceiver’sperformance.INSTALLING THE BELT CLIPIf necessary, attach the belt clipusing the two supplied3 x 8 mm screws.Note: If the belt clip is not installed,its mounting location may get hotduring continuous transmission orwhen left sitting in a hotenvironment.INSTALLING THE (O PTIONAL) A NTENNADo not use glue which is designed to prevent screw loosening wheninstalling the belt clip, as it may cause damage to the transceiver.Acrylic ester, which is contained in these glues, may crack thetransceiver’s back panel.S A B C1 2MIC< >