Kenwood TK-2312 Instruction Manual

Also see for TK-2312: Instruction manual Service manual

7FleetSyncFleetSync is an Alphanumeric 2-way Paging Function and is aprotocol owned by Kenwood Corporation.Note: If set up by your dealer, your transceiver may use theMDC-200 feature in place of FleetSync. MDC-200 and FleetSynccannot be operated simultaneously. However, they can beprogrammed onto the same transceiver, for different zones.SElCAll (SElECTIvE CAllING)A Selcall is a voice call to a particular station or to a group ofstations.■ Transmitting1 Select your desired zone and channel.2 Press the key programmed as [Selcall] or [Selcall +Status] to enter Selcall mode.• The last selected station ID appears on the display.3 Press or C> to select the ID of the station you wantto call.4 Press the PTT switch and begin your conversation.• Alternatively, you can press the Side 2 key to page theselected station, rather than making a voice call.■ ReceivingAn alert tone will sound, the transceiver will automaticallyenter Selcall Mode, and the calling station’s ID will appearwhen a Selcall is received.To respond to the call, press the PTT switch and speak intothe microphone.■ Identification CodesAn ID code is a combination of a 3-digit Fleet number anda 4-digit ID number. Each transceiver must have its ownFleet and ID number.Note: The ID range may be limited by programming.