Kenwood TK-2312 Instruction Manual

Also see for TK-2312: Instruction manual Service manual

22EMErGENCy CAllSIf your transceiver has been programmed with the Emergencyfunction, you can make emergency calls.1 Press and hold the key programmed as [Emergency].• Depending on the delay time programmed into yourtransceiver, the length of time you must hold the Emergencykey will vary.• When the transceiver enters Emergency mode, the transceiverwill change to the Emergency channel and begin transmittingbased on how the transceiver is set up.2 To exit Emergency mode, press and hold the [Emergency]key again.• If the Emergency mode completes the preset number ofcycles, Emergency mode will automatically end and thetransceiver will return to normal.■ Lone Worker ModeLone Worker Mode is a safety feature built into thetransceiver. If the transceiver is not operated for apre-programmed period of time, the transceiver will emit atone and automatically enter Emergency operation.Press and hold the key programmed as [Lone Worker] for2 seconds to toggle the Lone Worker function ON or OFF.TAlK AroUNDDuring interruptions in service (such as a power failure), youcan continue to communicate by using the Talk Around feature.Talk Around allows you to communicate directly with othertransceivers without the use of a repeater, as long they are nottoo far away or there are no geographical obstacles in the way.Press the key programmed as [Talk Around] to toggle theTalk Around function ON or OFF.• The indicator appears while Talk Around is activated.