Kenwood TK-2312 Service Manual

Also see for TK-2317: Specification Instruction manual Instruction manual Service manual

TK-2312/23177REALIGNMENT5-5. Item Setting ModeIn this mode, the selected item in the Item Selectionmode can be programmed.When the [S] key is pressed in the Item Selection mode,the transceiver enters the Item Setting mode.The setup items for item setting mode are as follows.Setup item Display Remarks1. RX frequency 1. RX FREQ →***.*****Receive frequency136.00000~174.00000MHz2. RX signaling2. RX SIGTONE OFF/QT ***.*/DQT ***N/DQT ***IReceive QT/DQT3. TX frequency 3. TX FREQ →***.*****Transmit frequency136.00000~174.00000MHz4. TX signaling4. TX SIG →TONE OFF/QT ***.*/DQT***N/DQT***ITransmit QT/DQT5. RF power Hi/Low 5. PWR *** HI/LOW6. Scan Del/Add 6. SCN *** DEL/ADD7. Beat shift on/off 7. SFT *** ON/OFF8. Compander on/off 8. CMP *** ON/OFFKey operationKey Key Function[Selector] Changing the selection item (RX/TX frequency andRX/TX signaling only)[Side1] No action[Side2] No action[S]• Store the current settings and return to the ItemSelection mode without backup.• A MHz digit of the frequency blinks. (RX/TX fre-quency only)• The icon of the current signaling configurationblinks. (RX/TX signaling only)[A] Abort the current settings and return to the ItemSelection mode without backup[ Toggle/Decrease the blinking value.[C>] Toggle/Increase the blinking value.5-6. Self Programming Mode flow chart■ Channel selection mode flow chartData password[S]+Power ONSLF.LOCK.RorDisplaySLF.LOCK.WSELF I - IZone ChannelSelf programming mode[S][S][A]Channel selection mode[S][A]Zone selection Channel selectionItem setting mode[S]Read authorization password /Overwrite password entry (6 digits)When the Readauthorization password isset to the transceiver.When the Overwriteauthorization password isset to the transceiver.[Selector][[C>] : Zone/Channel number increment■ Item selection mode flow chartChannel selection mode[S][S][A] 1. RX frequency[Selector][S][A] 2. RX signaling[Selector][S][A] 3. TX frequency[Selector][S][A] 4. TX signaling[Selector][S][A] 5. RF power Hi / Low[Selector][S][A] 6. Scan Del / Add[Selector][S][A] 7. Beat shift on / off[Selector][S][A] 8. Compander on / offItem setting mode[Selector]