Kenwood TK-3230 Instruction Manual

6qUiet taLk/ digitaL qUiet taLkQT (Quiet Talk) and DQT (Digital Quiet Talk) are functionsthat reject signals from undesired parties that are using thesame channel as you. You will hear audio from the speakeronly when you receive a signal that contains a tone or codematching the one set up on the channel you are using.Likewise, when you transmit on a channel set up with QT orDQT, the receiving station must have a matching tone or codein order to hear your signal.You can select a tone or code for each channel. There are39 QT tones and 83 DQT codes. After changing the QT/ DQTsetting, confirm that the other members in your group haveselected the same tone or code. Press the MENU key.• The current setting blinks. Press the or key to select your desired value.• The values range from 01 to 39 for QT tones, then proceed to01 to 83 for DQT codes. When selecting a DQT code, theicon appears on the display.• Select “ ” to turn off both QT and DQT.• Refer to pages 52 and 53 for the tones/codes corresponding tothe QT/DQT numbers. Press the MENU key 4 times, or press the PTT, MON, orCAL key or after mode reset time has elapsed {page 47} toconfirm the selection and return to operating mode.