Kenwood TK-3230 Instruction Manual
                                                                  | |
Contents
|
key while turning the transceiver power ON (for 1 second). Press the or key to select “ ”. Press the MENU key then press or to select “ ”(3 minutes) or “ ” (10 minutes). Press the MENU key to exit the selection. Press the PTT, MON, or CAL key to exit Setting Mode.This transceiver is also equipped with a pre-alert tone whichsounds 10 seconds before the Time-out Timer expires.This will allow you time to finish your message before thetransceiver automatically stops transmitting.BAttery SAverThis transceiver has been designed to give you the most out ofyour battery power. The battery saver function decreases theamount of power used when a signal is not being received andno operations are being performed.While using the transceiver, battery saver will automaticallyswitch ON after 5 seconds have elapsed with no operations orreceived calls. Operating the transceiver or receiving a call willswitch this feature OFF until 5 seconds of non-operation occursagain.To turn this function on or off: With the transceiver power OFF, press and hold the MENUkey while turning the transceiver power ON (for 1 second). Press the or key to select “ ”. |
Related manuals for Kenwood Instruction manual
Kenwood TK-3230DX Instruction Manual
Kenwood TK-3130 Instruction Manual
Kenwood TK-930 Instruction Manual
Kenwood TK-3400 Instruction Manual
Kenwood TK-3406 Instruction Manual
Kenwood TK-2302 Instruction Manual
Kenwood TK-2306 Instruction Manual
Kenwood TK-2302 Instruction Manual
Kenwood TK-3360 Instruction Manual
Kenwood TK-3173 Instruction Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine