Kenwood TK-5220 Instruction Manual

Also see for TK-5220: Service manual

BASIC OPERATIONSSwitching power on/oFFTurn the Power switch/ Volume control clockwise to switch thetransceiver ON.Turn the Power switch/ Volume control counterclockwise fullyto switch the transceiver OFF.■ Transceiver PasswordIf the transceiver is password protected, “PASSWORD” willappear on the display when the power is turned ON. Tounlock the transceiver, enter the password:1 Select a character using / .• On keypad models, you can enter the password directly.2 Press to enter the selected character.• This step is unnecessary when using the keypad.3 Repeat steps and 2 to enter the entire password.• Press or # to delete a character. Press and hold or# to delete all characters.4 Press or to confirm the entry.• If you enter an incorrect password, an error tone soundsand the transceiver remains locked.• The password can contain a maximum of digits.AdjuSting the volumeRotate the Power switch/ Volume control to adjust the volume.Clockwise increases the volume and counterclockwisedecreases it.