Kenwood TK-5220 Instruction Manual

Also see for TK-5220: Service manual

■ Reviewing Messages in the Stack Memory1 Press the key programmed as Stack, or press and holdthe key programmed as Selcall, Status, or Selcall +Status to enter Stack mode.• The last received message is displayed.2 Press / to select the desired message.• Message types are identified as follows:I: Caller ID, S: Status Message, M: Short Message• Press and hold for second to cycle the displayinformation as follows:ID Name > Status/Short Message > Channel > Time Stamp3 Press to return to normal operation.• To delete the selected message, press or #. Toconfirm the deletion, press or .• To delete all messages, press and hold or # for second. To confirm the deletion, press or .Short/long meSSAgeSReceived short messages are displayed the same as Statusmessages and are stored in the same stack memory.To send short messages, and to send and receive longmessages, you must connect the transceiver to a PC. Askyour dealer for details.gpS reportTo send your location data, you must first connect a GPS unit tothe transceiver. Once connected, press the key programmed asSend the GPS data, or access the Menu {page 2}. If set upby your dealer, GPS data may be automatically transmitted at apreset time interval.