Kenwood TK-5410 Instruction Manual

Also see for TK-5210: Specifications Specifications Instruction manual Service manual Instruction manual

23■ Receiving Group Calls (P25)When you receive a group call on a Conventional channeland the received group ID matches the ID set up on yourtransceiver, you can hear the caller’s voice.When you receive a group call on a Trunking channel, thetransceiver automatically switches to the traffic channel toreceive the call.• Readjust the volume as necessary.• If the vibrator function is on, the transceiver will vibrate when acall is received.■ Receiving Individual Calls (P25)When you receive an individual call on a Conventionalchannel, a ringing tone will sound and on K2/K3/K/K/K7model transceivers, the display will show the caller’s ID.To respond to the call, press and hold the PTT switch andspeak into the transceiver as you would during a normaltransmission.When you receive an individual call on a Trunking channel,a ringing tone will sound and on K2/K3/K/K/K7 modeltransceivers, the display will alternate between the caller’sID and “RECEIVING”. To receive the call, press the PTTswitch. To deny the call, press and hold the Side 1 key orthe keypad # key. After receiving the call, you can respondto the call by pressing and holding the PTT switch andspeaking into the transceiver as you would during a normaltransmission. After the call is finished, press the Side 1 keyor the keypad # key to end the call.• If the vibrator function is on, the transceiver will vibrate when acall is received.