Kenwood TK-5410 Instruction Manual

Also see for TK-5210: Specifications Specifications Instruction manual Service manual Instruction manual

2ScAn progrAmming (k2/k3/k5/k6/k7 modelS only )<tk-5210/ tk-5310 only >Note: Scan programming is only available when usingConventional operation.■ Conventional OperationIf Scan Type has been programmed for Conventionaloperation, you are able to reprogram your scan list.1 Press the key programmed as Scan Program.• The icon appears on the display and blinks.2 Press the Side 2 and Side 3 keys to select the zone orchannel you will add to or remove from the scan list.• The icon appears on the display for zones/ channelsthat are added to the scan list.• Press the A key to toggle between Zone Select andChannel Select.3 Press the key to add the selected zone or channel tothe scan list or the B key to remove the selected zoneor channel from the scan list.• The icon appears on the display when a zone/ channelis added to the scan list, and disappears when a zone/channel is removed from the scan list.4 Press the Side 1 key to exit scan programming.If the Priority channel has been set as Operator Selectableby your dealer, you are also able to reprogram the Prioritymode.1 Press the key programmed as Scan Program.• The icon appears on the display and blinks.2 Press and hold the A key for 2 seconds to edit thePriority channel.3 Press the Side 2 and Side 3 keys to select the channelyou will set as the Priority channel.