Kenwood TK-5410 Instruction Manual

Also see for TK-5210: Specifications Specifications Instruction manual Service manual Instruction manual

3SIGNALINGNote: Signaling can be used only in Conventional FM Operation.Quiet tAlk (Qt)/ digitAl Quiet tAlk (dQt)Your dealer may have programmed QT or DQT signaling onyour transceiver channels. A QT tone/ DQT code is asub-audible tone/code which allows you to ignore (not hear)calls from other parties who are using the same channel.When a channel is set up with a QT tone or DQT code, squelchwill only open when a call containing a matching tone or code isreceived. Likewise, signals that you transmit will only be heardby parties whose QT/ DQT signaling matches your transceiver.If a call containing a different tone or code is made on thesame channel you are using, squelch will not open and you willnot hear the call. This allows you to ignore (not hear) thesecalls. Although it may seem like you have your own privatechannel while using QT/ DQT, other parties can still hear yourcalls if they set up their transceiver with the same tone or code.■ Operator Selectable Tone (OST) (K2/K3/K5/K6/K7 models only)If a key has been programmed with Operator SelectableTone, you can reprogram the QT tone or DQT code oneach of your channels.1 Select your desired channel.2 Press and hold the key programmed as OperatorSelectable Tone for second.• The icon appears on the display.3 Press the Side 2 and Side 3 keys or the D> and keys to select your desired tone or code from to 0.4 Press the Side 1 key to save your new setting.After selecting and setting up your desired tone or code,press the Operator Selectable Tone key to activate the OSTfunction. Press this key again to turn the OST function OFF.